Carbon Fiber (CF) Z4 Coupe roofs-Feeler participants

Z4-VILLA · 03-15-2013, 08:12 AM

any teaser pics?

Urluz3n · 03-16-2013, 07:11 AM

I hate to be a PITA but when do you expect the 1st one to be delivered?

Z4-VILLA · 03-16-2013, 09:23 AM

Quote:

Originally Posted by Urluz3n

I hate to be a PITA but when do you expect the 1st one to be delivered?

inTgr8r · 03-16-2013, 09:27 AM

Quote:

Originally Posted by Z4-VILLA

You changing to a coupe?

Z4-VILLA · 03-17-2013, 12:23 PM

Quote:

Originally Posted by inTgr8r

You changing to a coupe?

just curious, kinda wanna see the works

Twisted Six · 03-18-2013, 12:58 PM

Quote:

Originally Posted by Urluz3n

I hate to be a PITA but when do you expect the 1st one to be delivered?

I look to be doing a roof removal video on my coupe within 30 days so I can install the first pulled roof set. Then I'll dial in the remaining steps for a new seal.

itdnwiwbp · 03-18-2013, 01:04 PM

Quote:

Originally Posted by Twisted Six

I look to be doing a roof removal video on my coupe within 30 days so I can install the first pulled roof set. Then I'll dial in the remaining steps for a new seal.

Exciting!

inTgr8r · 03-18-2013, 06:20 PM

^yup, can't wait

RobMCoupe · 03-18-2013, 09:34 PM

I can't wait to see this. How quickly can you produce them?

Twisted Six · 03-18-2013, 11:12 PM

Quote:

Originally Posted by RobMCoupe

I can't wait to see this. How quickly can you produce them?

Have not walked through that door yet. I'll know more once I have assembled and test fit two sets.

Finnegan · 03-18-2013, 11:39 PM

Excellent! Great update!

Twisted Six · 03-27-2013, 09:03 PM

Ok....quick update. I was hoping that the notes I'd be taking while disassembling the Z4 coupe interior would NOT have the need to remove seats,console etc. just to get the headliner out safely................and I was right!

In fact , removing the needed panels was such a breeze I am stoked to report it. The headliner R&R will challenge virtually no one!

In the process of documenting the roof removal my plan has been to utilize whatever hand tools most of us have on hand to keep this simple. And while I can say this is the case still, I feel I have also found something that will significantly speed the process of sealant separation to a minimum.

Of course the main goal here is to remove the roof all the while not damaging paint or trim. It is easier than one might think.

I'll have more to share soon. My roof will be fully off tomorrow and I'll clean off any old sealant from both the roof and car to begin the new seal method.

I also plan on driving the car sans roof to explore any new sounds,creaking etc. to better establish structural change if any,this includes a floor jack at one corner etc.

Stay tuned !!

dre99gsx · 03-27-2013, 10:54 PM

Make sure you weigh it!

inTgr8r · 03-27-2013, 10:55 PM

Great stuff!!!

I can't wait to hear more

Twisted Six · 03-28-2013, 10:38 AM

Quote:

Originally Posted by dre99gsx

Make sure you weigh it!

I already weighed the first one I obtained when making the molds. That weight is posted somewhere.

Quote:

Originally Posted by inTgr8r

Great stuff!!!

I can't wait to hear more

Developing the seal for either adhesive or non adhesive seal is my next main R&D.

Twisted Six · 03-28-2013, 02:23 PM

Quote:

Originally Posted by Twisted Six

Quote:

Originally Posted by dre99gsx

Make sure you weigh it!

I already weighed the first one I obtained when making the molds. That weight is posted somewhere.

Quote:

Originally Posted by inTgr8r

Great stuff!!!

I can't wait to hear more

Developing the seal for either adhesive or non adhesive seal is my next main R&D.

Roof is off with no bends, warp,scratches or dings. I was doing this all solo so it was hard to shoot even stills when both hands were often needed to hold things.
I wish my phone app could post pictures, otherwise ill have to wait till I'm back home at my laptop.

inTgr8r · 03-28-2013, 03:12 PM

just ordered a new windshield surround for this.
figured its a perfect time to renew the rubber.

Twisted Six · 03-28-2013, 03:23 PM

Quote:

Originally Posted by inTgr8r

just ordered a new windshield surround for this.
figured its a perfect time to renew the rubber.

Front windshield seal doesn't get bothered by this. It does cup the roof by about a half inch though . Mine sits outdoors all day these days and is still very pliable . It was only glued nearest the corners!

inTgr8r · 03-28-2013, 03:28 PM

Its just that mine is a little tired looking, so I figured for $30 it would be a good time to do it.

Twisted Six · 03-28-2013, 04:11 PM

Quote:

Originally Posted by inTgr8r

Its just that mine is a little tired looking, so I figured for $30 it would be a good time to do it.

That's cheaper than I'd have guessed! Why not do it!?

inTgr8r · 03-28-2013, 04:41 PM

Surprised me too

3point0 · 03-28-2013, 07:10 PM

Quote:

Originally Posted by Twisted Six

Developing the seal for either adhesive or non adhesive seal is my next main R&D.

we just started using some special marine sealant at work for sealing acrylic to aluminum under 14ft of water (I work in a fluid dynamics lab and we make models of stuff) anyhoo it's been really good at keeping water out, replacing fasteners and being relatively easy to remove. Made by Sika and readily available. I can dig up the exact name if you're interested.

03-15-2013, 08:12 AM	#287
Z4-VILLA Banned 111 Rep 2,460 Posts Drives: Z4M Hardtop Roadster Join Date: Feb 2009 Location: Classified iTrader: (0)	any teaser pics?
	Appreciate 0 Quote

03-16-2013, 07:11 AM	#288
Urluz3n Lackey 9 Rep 180 Posts Drives: 07 BMW M Coupe Join Date: Oct 2012 Location: Florida iTrader: (0)	I hate to be a PITA but when do you expect the 1st one to be delivered?
	Appreciate 0 Quote

03-18-2013, 06:20 PM	#294
inTgr8r Lieutenant General 2432 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	^yup, can't wait __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

03-18-2013, 09:34 PM	#295
RobMCoupe Captain 60 Rep 932 Posts Drives: 2007 Z4 M Coupe Join Date: Feb 2010 Location: Bay Area iTrader: (6)	I can't wait to see this. How quickly can you produce them?
	Appreciate 0 Quote

03-18-2013, 11:39 PM	#297
Finnegan Dog Listener 703 Rep 7,850 Posts Drives: Z4M/. Z3M, E36/46 M3 Join Date: Oct 2008 Location: Teaching the dog to slalom iTrader: (22)	Excellent! Great update!
	Appreciate 0 Quote

03-27-2013, 09:03 PM	#298
Twisted Six CarbonFiber Engineer @ ZeroMassMotorsports 40 Rep 1,481 Posts Drives: Z4si-coupe Join Date: Mar 2009 Location: -Laguna Beach Ca. iTrader: (6)	Ok....quick update. I was hoping that the notes I'd be taking while disassembling the Z4 coupe interior would NOT have the need to remove seats,console etc. just to get the headliner out safely................and I was right! In fact , removing the needed panels was such a breeze I am stoked to report it. The headliner R&R will challenge virtually no one! In the process of documenting the roof removal my plan has been to utilize whatever hand tools most of us have on hand to keep this simple. And while I can say this is the case still, I feel I have also found something that will significantly speed the process of sealant separation to a minimum. Of course the main goal here is to remove the roof all the while not damaging paint or trim. It is easier than one might think. I'll have more to share soon. My roof will be fully off tomorrow and I'll clean off any old sealant from both the roof and car to begin the new seal method. I also plan on driving the car sans roof to explore any new sounds,creaking etc. to better establish structural change if any,this includes a floor jack at one corner etc. Stay tuned !!
	Appreciate 0 Quote

03-27-2013, 10:54 PM	#299
dre99gsx Captain 510 Rep 911 Posts Drives: 1994 Toyota Supra Join Date: Aug 2011 Location: NJ iTrader: (2)	Make sure you weigh it! __________________ Andre - 2J into a Z4 Coupe!
	Appreciate 0 Quote

03-27-2013, 10:55 PM	#300
inTgr8r Lieutenant General 2432 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	Great stuff!!! I can't wait to hear more __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

03-28-2013, 03:12 PM	#303
inTgr8r Lieutenant General 2432 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	just ordered a new windshield surround for this. figured its a perfect time to renew the rubber. __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

03-28-2013, 03:28 PM	#305
inTgr8r Lieutenant General 2432 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	Its just that mine is a little tired looking, so I figured for $30 it would be a good time to do it. __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

03-28-2013, 04:41 PM	#307
inTgr8r Lieutenant General 2432 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	Surprised me too __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote