HELP

R0ME0 · 09-08-2015, 02:46 PM

I just plugged my stock seats back into my car (E86 Z4m) and my power seats don't seem to slide/move and heated seats don't come on and flash on the putton when I press it seem to be working.

I did the obvious parts which I plugged in the big yellow and black plug from the chassis side into the yellow and black plug under the seat on both sides.

On the passenger side I plugged the small black plug from the chassis side to the seat as well (I believe this is the weight sensor). While doing this I did notice that there were two black plugs left not attached under both seats on the seat side.

They are a black plug with 4 lateral prongs to each of them which look like they hook up to some type of relay. Not sure if this came loose from plugging into the seat somewhere but I didn't see where this could have connected and I sure don't remember this when I was installed in my Recaros before (but maybe I wasn't paying attention to the stock seat). Any help would be much appreciated as I am super lost and could use the help on this. I will try to snap some pics tonight but if anyone knows or heard of this issue before I would highly appreciate it. Thanks in advance.

Varinn · 09-08-2015, 06:16 PM

100% sure the big plug is fully locked in? It can be deceiving, and symptoms sound about right

R0ME0 · 09-09-2015, 04:15 PM

Quote:

Originally Posted by Varinn

100% sure the big plug is fully locked in? It can be deceiving, and symptoms sound about right

Thanks for the help! Got this fixed!

Varinn · 09-09-2015, 05:43 PM

Was that the problem in the end? Just the big connector?

Glad you got it sorted

09-08-2015, 02:46 PM	#1
R0ME0 "The Midas Touch" 519 Rep 1,055 Posts Drives: F87 LBB ///M2 Join Date: Aug 2007 Location: Seattle, WA iTrader: (14) Garage List 2017 M2 [10.00] 2008 Z4M - SOLD [0.00]	HELP - Issue with M Power/Heated Seats I just plugged my stock seats back into my car (E86 Z4m) and my power seats don't seem to slide/move and heated seats don't come on and flash on the putton when I press it seem to be working. I did the obvious parts which I plugged in the big yellow and black plug from the chassis side into the yellow and black plug under the seat on both sides. On the passenger side I plugged the small black plug from the chassis side to the seat as well (I believe this is the weight sensor). While doing this I did notice that there were two black plugs left not attached under both seats on the seat side. They are a black plug with 4 lateral prongs to each of them which look like they hook up to some type of relay. Not sure if this came loose from plugging into the seat somewhere but I didn't see where this could have connected and I sure don't remember this when I was installed in my Recaros before (but maybe I wasn't paying attention to the stock seat). Any help would be much appreciated as I am super lost and could use the help on this. I will try to snap some pics tonight but if anyone knows or heard of this issue before I would highly appreciate it. Thanks in advance.
	Appreciate 0 Tweet Quote

09-08-2015, 06:16 PM	#2
Varinn Private First Class 57 Rep 187 Posts Drives: 2007 Z4MC Join Date: Oct 2014 Location: Vancouver, BC, Canada iTrader: (0)	100% sure the big plug is fully locked in? It can be deceiving, and symptoms sound about right
	Appreciate 0 Quote

09-09-2015, 05:43 PM	#4
Varinn Private First Class 57 Rep 187 Posts Drives: 2007 Z4MC Join Date: Oct 2014 Location: Vancouver, BC, Canada iTrader: (0)	Was that the problem in the end? Just the big connector? Glad you got it sorted __________________ 1990 332i 5 speed (OBD2 S52 Swap) 2018 VW Golf R (6spd manual/copper orange metallic) 2008 KTM SuperDuke 990 2007 Z4M Coupe (#1026/1815) SOLD
	Appreciate 0 Quote