|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
08-29-2014, 10:29 AM | #1 |
Captain
114
Rep 779
Posts |
Brakes - What anti-squeal do you use ?
I ran out and didn't apply any when I change my rear brakes.. and yeah now when I tap the brakes a little I get the famous squeal noise.
What do you guys use on the pads ? should i get something like this http://www.ecstuning.com/BMW-E92-335...ads/ES2537721/
__________________
-Roranji
|
08-29-2014, 11:56 AM | #2 |
Second Lieutenant
15
Rep 222
Posts |
I've used this stuff with pretty good success, purchased through bavauto.com
http://noisefree.com/ It's not a fancy website!
__________________
2007 3.0si Coupe
Dinan Stage I Suspension (Shocks, Struts, Springs), Ground Control Front Camber Plates, Treehouse Racing Front Control Arm Bushings, RTAB Bushing Limiters |
Appreciate
0
|
08-30-2014, 05:35 AM | #3 | |
Private First Class
26
Rep 195
Posts |
Quote:
|
|
Appreciate
0
|
08-30-2014, 08:43 AM | #4 |
#buildnotbought
10634
Rep 4,852
Posts |
For all the metal->metal contacts on the outside (like caliper->caliper carrier, back&sides of brake pads et) I use copper grease (very thinly applied), as I find that copper grease sticks better/leaves a better film in harsh conditions than silicone grease.
For the guiding pins I use a silicon based grease as it has rubber guiding grommets/bushings. I think plastilube is also a silicon based grease.
__________________
Z4 3.0i | ESS TS2+ supercharger | Quaife ATB LSD | Brembo/BMW performance BBK front/rear | Schrick FI cams | Schmiedmann headers+cats | Powerflex/strongflex PU bushings | Vibra-technics engine mounts | H&R anti rollbars | KW V3 coilovers/KW camber plates | Sachs race engineering clutch | tons of custom sh#t
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|