[feeler] GB

inTgr8r · 06-03-2011, 07:14 AM

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

***GB is finished, no more will be made

(more pics in the DIY thread)

In case you missed the discussion in the "DIY APR splitter Install thread";
I have been asked if I could make a run of the fang fill piece that I made for my car.

I have enough material to make three more, which are already spoken for.
If there is enough additional interest in the fang fill piece, I will get material to do another run.

The Lexan fill strip
I checked shipping to 23456, it's about $30. (UPS standard)
As expected the length drives the cost up a bit, but not too bad.

It looks like $55 shipped would cover things.

I was planning to make a minor change to mine the next time I have to take the front end apart.
I would do away with the d.sided tape and instead drill up from the bottom & fasten with self tapping screws.
For this I would bond some additional blocks on the back (easier to target for drilling & a little more support)

So... You would get:
1. the fitted strip which is 1.5" high.
2. Wrapped in matte black 3M vinyl
3. 2 depth set stop blocks, which go behind @ each end (see pic in DIY thread)
4. optional ($5)- if you want the 3 rear spacer blocks (see DIY) I can do that too. But you may be OK with your current spacers. ....up to you

This is still just a feeler, I need 5 - 6 people to cover my material minimums.
Pricing is basically to cover my costs.
If it goes ahead please consider sending PP payment as gift or tack on a little extra to cover the PP fees.
Do NOT send any payments until this is a definite go.

Please check the DIY before committing to this.
I will be posting a few more pics for the revised 'bolt in' method. (instead of d.sided tape)
GB is a go, cut off date is Wednesday June 8th

In prior to GB
- Shipkiller [paid]
- Finnegan [paid]
- F360C [paid]

Please sign up only if definite.
1. Bammered [paid]
2. Z4Murder [paid]
3. Roffle Waffle [paid]
4. Daemonblitz [paid]
5. Shereef_Osman [paid]
6. P-Man [pending]

ZStig · 06-03-2011, 10:09 AM

Is it paint-able? I love it. Taking my splitter on the market, now that you gave me a great reason

Please sign up only if definite.
1. Bammered
2. Z4Murder
3. Roffle Waffle
4.
5.
6.

inTgr8r · 06-03-2011, 10:33 AM

It's a 3M vinyl wrap.
You can put your own wrap on, if you want something different.

ZStig · 06-03-2011, 10:42 AM

what about the material its made of, can I spray it with automotive paint?

inTgr8r · 06-03-2011, 11:10 AM

Quote:

Originally Posted by Roffle Waffle

what about the material its made of, can I spray it with automotive paint?

never done it, so I can't answer for sure.
IIRC, RC models are Lexan but I think they get painted on the inside.

Daemonblitz · 06-03-2011, 04:09 PM

I'm in if you're making them. I'll come pick it up if that's fine, so no need to ship. And I don't really need mine 3M Vinyl wrapped, I'm just going to Plastidip it.

1. Bammered
2. Z4Murder
3. Roffle Waffle
4. Daemonblitz
5.
6.

Finnegan · 06-03-2011, 08:57 PM

Bump--get in on this while you can folks!

inTgr8r · 06-04-2011, 05:42 AM

Quote:

Originally Posted by Daemonblitz

I'm in if you're making them. I'll come pick it up if that's fine, so no need to ship. And I don't really need mine 3M Vinyl wrapped, I'm just going to Plastidip it.

Sure; not a problem.

Samjam927 · 06-04-2011, 12:27 PM

Bump for something as simple and good looking as this is

604BrO · 06-04-2011, 01:53 PM

i want one tooo

crfine88 · 06-05-2011, 08:32 AM

Quote:

Originally Posted by Finnegan

Bump--get in on this while you can folks!

^ bump x2

inTgr8r · 06-06-2011, 08:20 AM

I talked to my supplier.
We're OK with the five signed up for a minimum order.

The cut off for this will be Wednesday June 8th, so that I can get organized for the weekend to make them up.

Thatcher · 06-07-2011, 02:47 PM

I'm in. This will give me some motivation to make a carbon splitter. Thanks for taking the initiative to set this up.. should be pretty cool.

inTgr8r · 06-07-2011, 07:06 PM

Quote:

Originally Posted by Thatcher

I'm in. This will give me some motivation to make a carbon splitter. Thanks for taking the initiative to set this up.. should be pretty cool.

I'd like to see what you come up with.

Thatcher · 06-08-2011, 01:06 AM

Quote:

Originally Posted by inTgr8r

I'd like to see what you come up with.

here's what i made five years ago for my widebody gti

crfine88 · 06-08-2011, 07:02 AM

Quote:

Originally Posted by Thatcher

here's what i made five years ago for my widebody gti

Nice

Shereef_Osman · 06-08-2011, 09:55 AM

Add me to the list! Thanks!

inTgr8r · 06-08-2011, 12:44 PM

done

Z4Murder · 06-08-2011, 02:08 PM

can you include the 3 rear spacer blocks with my order since i didnt install yet. thanks

inTgr8r · 06-08-2011, 02:13 PM

Quote:

Originally Posted by Z4Murder

can you include the 3 rear spacer blocks with my order since i didnt install yet. thanks

^ sure.

----------
I will be sending PMs to confirm what everyone wants.
Picking up supplies on Friday and if all goes well, will start shipping next week.

Z4Murder · 06-08-2011, 02:21 PM

thanks man

Shereef_Osman · 06-08-2011, 03:55 PM

Quote:

Originally Posted by Z4Murder

can you include the 3 rear spacer blocks with my order since i didnt install yet. thanks

Same on mine too please!

06-03-2011, 07:14 AM	#1
inTgr8r Lieutenant General 2426 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	GB - Fangs fill piece for APR splitters BIMMERPOST / Classifieds Asking Price: None Item Interest *GB is finished, no more will be made (more pics in the DIY thread) In case you missed the discussion in the "DIY APR splitter Install thread"; I have been asked if I could make a run of the fang fill piece that I made for my car. I have enough material to make three more, which are already spoken for. If there is enough additional interest in the fang fill piece, I will get material to do another run. The Lexan fill strip I checked shipping to 23456, it's about $30. (UPS standard) As expected the length drives the cost up a bit, but not too bad. It looks like $55 shipped would cover things. I was planning to make a minor change to mine the next time I have to take the front end apart. I would do away with the d.sided tape and instead drill up from the bottom & fasten with self tapping screws. For this I would bond some additional blocks on the back (easier to target for drilling & a little more support) So... You would get: 1. the fitted strip which is 1.5" high. 2. Wrapped in matte black 3M vinyl 3. 2 depth set stop blocks, which go behind @ each end (see pic in DIY thread) 4. optional ($5)- if you want the 3 rear spacer blocks (see DIY) I can do that too. But you may be OK with your current spacers. ....up to you This is still just a feeler, I need 5 - 6 people to cover my material minimums. Pricing is basically to cover my costs. If it goes ahead please consider sending PP payment as gift or tack on a little extra to cover the PP fees. Do NOT send any payments until this is a definite go. Please check the DIY before committing to this. I will be posting a few more pics for the revised 'bolt in' method. (instead of d.sided tape) GB is a go, cut off date is Wednesday June 8th In prior to GB - Shipkiller [paid] - Finnegan [paid] - F360C [paid] Please sign up only if definite.** 1. Bammered [paid] 2. Z4Murder [paid] 3. Roffle Waffle [paid] 4. Daemonblitz [paid] 5. Shereef_Osman [paid] 6. P-Man [pending] __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold) Last edited by inTgr8r; 07-31-2012 at 06:12 AM..
	Appreciate 0 Tweet Quote

06-03-2011, 10:09 AM	#2
ZStig instagram 997turbotom 279 Rep 7,376 Posts Drives: Interlagos Z4MR Join Date: Jun 2008 Location: Delray Beach, FL iTrader: (4)	Is it paint-able? I love it. Taking my splitter on the market, now that you gave me a great reason Please sign up only if definite. 1. Bammered 2. Z4Murder 3. Roffle Waffle 4. 5. 6. __________________
	Appreciate 0 Quote

06-03-2011, 10:33 AM	#3
inTgr8r Lieutenant General 2426 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	It's a 3M vinyl wrap. You can put your own wrap on, if you want something different. __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

06-03-2011, 10:42 AM	#4
ZStig instagram 997turbotom 279 Rep 7,376 Posts Drives: Interlagos Z4MR Join Date: Jun 2008 Location: Delray Beach, FL iTrader: (4)	what about the material its made of, can I spray it with automotive paint? __________________
	Appreciate 0 Quote

06-03-2011, 04:09 PM	#6
Daemonblitz Commander 219 Rep 850 Posts Drives: Z4MC/M5/640iX/M1000RR Join Date: Nov 2010 Location: Aurora, ON, Canada iTrader: (6) Garage List 2008 BMW M5 [9.50] 2006 Z4M Coupe [8.77] 2010 BMW S1000RR [10.00]	I'm in if you're making them. I'll come pick it up if that's fine, so no need to ship. And I don't really need mine 3M Vinyl wrapped, I'm just going to Plastidip it. 1. Bammered 2. Z4Murder 3. Roffle Waffle 4. Daemonblitz 5. 6.
	Appreciate 0 Quote

06-03-2011, 08:57 PM	#7
Finnegan Dog Listener 701 Rep 7,850 Posts Drives: Z4M/. Z3M, E36/46 M3 Join Date: Oct 2008 Location: Teaching the dog to slalom iTrader: (22)	Bump--get in on this while you can folks!
	Appreciate 0 Quote

06-04-2011, 12:27 PM	#9
Samjam927 The One And Only 15 Rep 398 Posts Drives: 2006 TiAg ///M Roadster Join Date: Jun 2007 Location: Deerfield, Illinois iTrader: (0) Garage List 2006 Z4M Roadster [10.00] 2003 Z4 [5.00]	Bump for something as simple and good looking as this is __________________ By Samjam927
	Appreciate 0 Quote

06-04-2011, 01:53 PM	#10
604BrO ///M GENERAL 51 Rep 466 Posts Drives: M Join Date: Mar 2008 Location: SixOhFour iTrader: (4)	im in i want one tooo
	Appreciate 0 Quote

06-06-2011, 08:20 AM	#12
inTgr8r Lieutenant General 2426 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	I talked to my supplier. We're OK with the five signed up for a minimum order. The cut off for this will be Wednesday June 8th, so that I can get organized for the weekend to make them up. __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold) Last edited by inTgr8r; 06-06-2011 at 08:36 AM..
	Appreciate 0 Quote

06-07-2011, 02:47 PM	#13
Thatcher Second Lieutenant 43 Rep 258 Posts Drives: M Coupes Join Date: Mar 2011 Location: Manhattan / Miami / Maine iTrader: (0)	I'm in. This will give me some motivation to make a carbon splitter. Thanks for taking the initiative to set this up.. should be pretty cool. __________________ @Thatcher thatcherindustries.com independentwheel.com
	Appreciate 0 Quote

06-08-2011, 09:55 AM	#17
Shereef_Osman Second Lieutenant 16 Rep 232 Posts Drives: 06 Z4MC & 89 325is Join Date: May 2010 Location: Toronto, Ontario iTrader: (6)	Add me to the list! Thanks!
	Appreciate 0 Quote

06-08-2011, 12:44 PM	#18
inTgr8r Lieutenant General 2426 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	done __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

06-08-2011, 02:08 PM	#19
Z4Murder Major 28 Rep 1,110 Posts Drives: > speed limit Join Date: Apr 2010 Location: Buffalo, NY iTrader: (1)	can you include the 3 rear spacer blocks with my order since i didnt install yet. thanks __________________ 2007 TiAg ///MCoupe * Dinan strut bars * ZHP knob * RPI scoop * Ultimate Pedals * RE Diablo * 3.91 TMS gears * Apex PS7 * Eventuri intake* Nitto NT05 * TMS pullies * Zeck CDV * RE tranny mounts * Tekarbon * Mstache 2 * '14 Jeep Grand Cherokee Overland Hemi... No more snow for the M!
	Appreciate 0 Quote

06-08-2011, 02:21 PM	#21
Z4Murder Major 28 Rep 1,110 Posts Drives: > speed limit Join Date: Apr 2010 Location: Buffalo, NY iTrader: (1)	thanks man __________________ 2007 TiAg ///MCoupe * Dinan strut bars * ZHP knob * RPI scoop * Ultimate Pedals * RE Diablo * 3.91 TMS gears * Apex PS7 * Eventuri intake* Nitto NT05 * TMS pullies * Zeck CDV * RE tranny mounts * Tekarbon * Mstache 2 * '14 Jeep Grand Cherokee Overland Hemi... No more snow for the M!
	Appreciate 0 Quote