Vibra-tech Engine Mounts and Bolt Swap

ChitownX · 10-06-2013, 12:45 PM

So I finally purchased the Vibra-tech engine mounts and am getting ready to install them. While I'm at it I want to replace the right side engine mount bolts lisedt in the BMW TSB. I plan to replace both sides while I'm at it and to use BMW Motorsport Engine Mount Bolts. Are there any other bolts, etc that I should look to replace while I'm at it? Any input, part numbers and installation instructions or advice would be appreciated.

Thanks

gtMc · 10-09-2013, 08:37 PM

good to hear it - the mounts have been a great mod so far....

While there are about 4 different threads from the past few months on this topic, check out this thread below for info on the 10.9 bolts, etc etc...

http://www.zpost.com/forums/showthre...=860353&page=3
should be post 48, page 3.

gtMc · 10-09-2013, 08:38 PM

and another, this is ships take on it:
http://www.zpost.com/forums/showthread.php?t=863393

nekky · 10-10-2013, 10:16 AM

I completed this with a friend almost a month ago. I went with the Fast Road mounts and have found there to be next to *no* additional NVH. I replaced *both* sides engine mount bolts and did tranny mounts at the same time. Everything is good now!

TestShoot · 10-10-2013, 04:52 PM

I just got sticker shock from engine mounts

seank · 10-10-2013, 06:09 PM

Quote:

Originally Posted by TestShoot

I just got sticker shock from engine mounts

and those aren't expensive engine mounts. Grp N mounts are $800.

10-06-2013, 12:45 PM	#1
ChitownX Private 19 Rep 99 Posts Drives: 11 CB X3 35i MS; 07 BS M Coupé Join Date: Apr 2011 Location: Chicago iTrader: (0)	Vibra-tech Engine Mounts and Bolt Swap So I finally purchased the Vibra-tech engine mounts and am getting ready to install them. While I'm at it I want to replace the right side engine mount bolts lisedt in the BMW TSB. I plan to replace both sides while I'm at it and to use BMW Motorsport Engine Mount Bolts. Are there any other bolts, etc that I should look to replace while I'm at it? Any input, part numbers and installation instructions or advice would be appreciated. Thanks
	Appreciate 0 Tweet Quote

10-09-2013, 08:37 PM	#2
gtMc Captain 21 Rep 704 Posts Drives: '08 MC Join Date: Nov 2011 Location: NNJ iTrader: (1) Garage List '03 e39 m sport [0.00] '08 mc [0.00]	good to hear it - the mounts have been a great mod so far.... While there are about 4 different threads from the past few months on this topic, check out this thread below for info on the 10.9 bolts, etc etc... http://www.zpost.com/forums/showthre...=860353&page=3 should be post 48, page 3. __________________ ZHP/Zeck CDV/VT engine mounts/RE trans mounts;clutch stop/Stubby
	Appreciate 0 Quote

10-09-2013, 08:38 PM	#3
gtMc Captain 21 Rep 704 Posts Drives: '08 MC Join Date: Nov 2011 Location: NNJ iTrader: (1) Garage List '03 e39 m sport [0.00] '08 mc [0.00]	and another, this is ships take on it: http://www.zpost.com/forums/showthread.php?t=863393 __________________ ZHP/Zeck CDV/VT engine mounts/RE trans mounts;clutch stop/Stubby
	Appreciate 0 Quote

10-10-2013, 10:16 AM	#4
nekky Wagon life 39 Rep 991 Posts Drives: '16 328d M Sport Touring Join Date: May 2011 Location: Vancouver iTrader: (2)	I completed this with a friend almost a month ago. I went with the Fast Road mounts and have found there to be next to no additional NVH. I replaced both sides engine mount bolts and did tranny mounts at the same time. Everything is good now!
	Appreciate 0 Quote

10-10-2013, 04:52 PM	#5
TestShoot I1, I won 8 Rep 97 Posts Drives: E71 M, E60 535i Join Date: Jul 2009 Location: Beverly Hills, CA iTrader: (0)	I just got sticker shock from engine mounts __________________ +-============[tSc]==============-+ http://www.TestShoot.com
	Appreciate 0 Quote