|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
10-28-2023, 10:33 PM | #1 |
Private
5
Rep 65
Posts |
Used RacingBrake RB460 & RB24, 4F/2R BBK + spare parts/pads from Z4M
Hi there all. I have a variety of parts (I believe they're all there including an extra caliper, some extra rotor rings, a couple different pads, SS brake lines, might be missing some hardware) for a 4-piston front, 2-piston rear BBK from RacingBrake. Specifically, I believe the PNs and parts are as follows: RB460 front calipers: https://racingbrake.com/rb460/ RB24 rear calipers: https://racingbrake.com/rb24/ XT970 front pads (2 sets) XR70 front pads (1 set) XT960 rear pads (2 sets) XR70 rear pads (1 set) Rotors front (2 complete) Rotors rear (2 complete) Additional rotor rings, I believe I have one for each corner, will confirm if there's interest. The pads are a mix of barely used or new (mostly brand new). I can get more specifics or photos if desired. Truth be told, I had a really poor experience with these. Call it lack of experience with track braking at that point in my hobby, but my life got far better getting the OE calipers and some nice track pads. These have mostly just sat around after I went back to OE + track pads doing absolutely nothing. The whole kit originally cost, I believe, around $4k, don't remember the actual figure offhand. I remember reading rave reviews from some forum members when I first purchased, but they just weren't for me. I've taken pictures of just about all of the parts. I can clean them with brake cleaner before I ship them if desired. I can also take additional photos if desired. They aren't in the best cosmetic shape and you may need new piston seals. Photos are on Google Photos here: https://photos.app.goo.gl/sPnx2iJv1eQ13shg7 Asking price here for the whole kit and caboodle is $1500 + shipping. I honestly have no idea if this is a deal or they're not worth that much at this point but I think that's where I'm at on price. As far as applications on your specific vehicle, you'll have to do your homework. They, at a minimum, fit on my car. I will try to be responsive but I haven't been a very active forum member in a while, so if it takes me some time to respond, please bear with me. Thanks!
__________________
2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
Last edited by mimarcos; 11-14-2023 at 11:07 AM.. |
10-29-2023, 01:49 PM | #3 |
Private
5
Rep 65
Posts |
__________________
2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
|
Appreciate
0
|
10-31-2023, 07:55 AM | #4 |
Private
5
Rep 65
Posts |
Still available.
__________________
2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
|
Appreciate
0
|
11-01-2023, 03:50 PM | #5 |
Captain
514
Rep 917
Posts |
Front and rear rotor diameter and width?
__________________
Andre - 2J into a Z4 Coupe!
|
Appreciate
0
|
11-02-2023, 12:56 PM | #6 |
Private
5
Rep 65
Posts |
Front is 348x30mm and rear is 330x22mm.
I am quoting those figures off what I believe was the original kit I purchased - I will confirm the measurements later tonight.
__________________
2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
|
Appreciate
0
|
11-14-2023, 11:07 AM | #7 |
Private
5
Rep 65
Posts |
Price dropped to $1,000.
__________________
2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
|
Appreciate
0
|
02-09-2024, 09:25 PM | #9 |
Private
5
Rep 65
Posts |
Ah, I'm so sorry, these sold a while back and I didn't update the listing. Stopped checking here since there wasn't a ton of activity.
__________________
2006 Z4M (Emmy), 2018 WRX 50th Anniversary, and former 2013 335is Coupe, 2012 S4 (Meli), 2008 328xi (Lucy) and 2004 X3 2.5i (Scar)
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|