|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
05-12-2021, 06:53 AM | #1 |
Captain
884
Rep 685
Posts
Drives: 06 Black Sapphire Z4MR
Join Date: Jul 2018
Location: Ontario
|
Suspension Rattle
See if anyone may know what it is, it is also accompanied with vibrations at highway speeds.
I had the front end up last week, and i didn't see or feel anything's loose. https://drive.google.com/file/d/1SAG...ew?usp=sharing - 1st recording https://drive.google.com/file/d/1S9f...ew?usp=sharing - 2nd recording Anyone also know what size is the OEM front control arm hex?
__________________
Revolution of our Times
I will return to the track, one day. |
05-15-2021, 05:00 PM | #2 |
Captain
114
Rep 779
Posts |
Really hard to tell.. the control arm the middle nut is 21mm. I had to go buy a 21mm for it. not sure about the end.. Ill go measure it in a bit..
__________________
-Roranji
|
Appreciate
0
|
05-15-2021, 07:45 PM | #3 |
Captain
1691
Rep 685
Posts |
Check your bolts on the sub-frame brace. My suspension was driving me crazy for weeks making strange noises and I found two loose bolts, fixed the problem.
https://www.ecstuning.com/b-genuine-...e/51717028433/ |
Appreciate
0
|
05-17-2021, 06:54 AM | #4 |
Captain
884
Rep 685
Posts
Drives: 06 Black Sapphire Z4MR
Join Date: Jul 2018
Location: Ontario
|
I took it to a shop and finally traced the issue, should have been obvious
Top nut of my coilovers came loose I had to take it off, and retighten it
__________________
Revolution of our Times
I will return to the track, one day. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|