Eventuri Carbon Intake for BMW Z4M

inTgr8r · 02-20-2015, 09:27 AM

Quote:

Originally Posted by JCF

I assume the "pre-order" phase and lower cost has ended at this point, right?

Yes, there is a new thread posted in the vendor section.
they still have a members discount.
http://www.zpost.com/forums/showthread.php?t=1090695

XMetal · 02-20-2015, 10:37 AM

Quote:

Originally Posted by inTgr8r

#066 arrived today.

....too dang cold to install though.

Please let us know how it compares to your previous AFE once you get it installed

inTgr8r · 02-20-2015, 11:05 AM

definitely

RossBMWZseries · 02-20-2015, 12:29 PM

I hate "all y'all!"

I wish I had a CF intake

XMetal · 02-20-2015, 01:55 PM

Quote:

Originally Posted by RossBMWZseries

I hate "all y'all!"

I wish I had a CF intake

Didn't I told you about it over on bimmerforums (my user name over there is "dkl") back in November? You snooze, you loose

RossBMWZseries · 02-20-2015, 04:54 PM

Quote:

Originally Posted by XMetal

Didn't I told you about it over on bimmerforums (my user name over there is "dkl") back in November? You snooze, you loose

Sooo that was you? haha yea man, I decided to go for a few other "more expensive" mods first, that CAI will come later God willingly

Z4Murder · 02-22-2015, 02:45 PM

Got mine the other day. I was impressed with the attention to detail on the packaging and the product itself. Good work Eventuri crew, I can't wait to install once the horrible weather goes away.

Imran@Evolve · 02-23-2015, 04:57 AM

Quote:

Originally Posted by Z4Murder

Got mine the other day. I was impressed with the attention detail on the packaging and the product itself. Good work Eventuri crew, I can't wait to install once the horrible weather goes away.

Look forward to your feedback on it.

crfine88 · 02-23-2015, 06:40 PM

Installed #058 this weekend!

This is really a top notch kit. The fit and finish exceeded my expectations. The Eventuri kit is leaps an bounds ahead of the GruppeM I had run. Until now, GruppeM kit had been the nicest availiable for our cars. Boths Kits sound awesome, but the Eventuri is on another level when it construction and appearance.

Way to raise the bar guys!

For the install, I ended up relocating the coolant line beneath the intake. I removed the tab and added the clip to a stock bracket location. I also notched this bracket to add a bit more clearance for the intake elbow (not needed, but I wanted the intake to point down ward a bit more to get the front alignment I was going for. It works out nicely and cleans up look even more.

inTgr8r · 02-23-2015, 07:38 PM

Sounds great Chris. The coolant line was on my to do list as well.

crfine88 · 02-23-2015, 08:20 PM

Quote:

Originally Posted by inTgr8r

Sounds great Chris. The coolant line was on my to do list as well.

Very cool Ian, sent you some pics. Worked out pretty well, looking forward to what you come up too

XMetal · 02-23-2015, 08:42 PM

Quote:

Originally Posted by crfine88

Installed #058 this weekend!

This is really a top notch kit. The fit and finish exceeded my expectations. The Eventuri kit is leaps an bounds ahead of the GruppeM I had run. Until now, GruppeM kit had been the nicest availiable for our cars. Boths Kits sound awesome, but the Eventuri is on another level when it construction and appearance.

Way to raise the bar guys!

For the install, I ended up relocating the coolant line beneath the intake. I removed the tab and added the clip to a stock bracket location. I also notched this bracket to add a bit more clearance for the intake elbow (not needed, but I wanted the intake to point down ward a bit more to get the front alignment I was going for. It works out nicely and cleans up look even more.

You are 1 ahead of me...#059 here

Are you referring to the coolant lines connected to the secondary waterpump? Like the issue I ran into starting on post #10 of this tread => http://www.zpost.com/forums/showthread.php?t=1077573

If so, do you mind posting some pictures of your coolant line relocation "solution"? I would love to get it better aligned as well. Thanks

crfine88 · 02-24-2015, 08:59 AM

Quote:

Originally Posted by XMetal

Quote:

Originally Posted by crfine88

Installed #058 this weekend!

This is really a top notch kit. The fit and finish exceeded my expectations. The Eventuri kit is leaps an bounds ahead of the GruppeM I had run. Until now, GruppeM kit had been the nicest availiable for our cars. Boths Kits sound awesome, but the Eventuri is on another level when it construction and appearance.

Way to raise the bar guys!

For the install, I ended up relocating the coolant line beneath the intake. I removed the tab and added the clip to a stock bracket location. I also notched this bracket to add a bit more clearance for the intake elbow (not needed, but I wanted the intake to point down ward a bit more to get the front alignment I was going for. It works out nicely and cleans up look even more.

You are 1 ahead of me...#059 here

Are you referring to the coolant lines connected to the secondary waterpump? Like the issue I ran into starting on post #10 of this tread => http://www.zpost.com/forums/showthread.php?t=1077573

If so, do you mind posting some pictures of your coolant line relocation "solution"? I would love to get it better aligned as well. Thanks

Looks like you need to rotate the intake elbow that attaches to the plenum clockwise to get the clearance you need. I will post pics as soon as I get a chance, most likely this evening

XMetal · 02-24-2015, 09:23 AM

That's eventually what I ended up doing (rotating the elbow as much as it will go clockwise) to get the added clearance.

crfine88 · 02-24-2015, 10:30 AM

Quote:

Originally Posted by XMetal

That's eventually what I ended up doing (rotating the elbow as much as it will go clockwise) to get the added clearance.

Very cool,
I will post pics of how I modified the bracket to lower the sensor beneath the elbow. This allows for you to rotate the elbow counter clockwise aiming straighter alignment to the intake. Let me know if that's what you're looking for.

PLCZ4MC · 02-24-2015, 11:44 AM

I really want one errr. It is $800 total now I think to U.S.
I might have to put my Afe and my Rpi scopp on sale soon if I wanna get one.

XMetal · 02-24-2015, 03:41 PM

Quote:

Originally Posted by crfine88

Very cool,
I will post pics of how I modified the bracket to lower the sensor beneath the elbow. This allows for you to rotate the elbow counter clockwise aiming straighter alignment to the intake. Let me know if that's what you're looking for.

Yes please...That would very much be appreciated. Thanks

Imran@Evolve · 02-25-2015, 05:51 AM

Quote:

Originally Posted by crfine88

Installed #058 this weekend!

This is really a top notch kit. The fit and finish exceeded my expectations. The Eventuri kit is leaps an bounds ahead of the GruppeM I had run. Until now, GruppeM kit had been the nicest availiable for our cars. Boths Kits sound awesome, but the Eventuri is on another level when it construction and appearance.

Way to raise the bar guys!

For the install, I ended up relocating the coolant line beneath the intake. I removed the tab and added the clip to a stock bracket location. I also notched this bracket to add a bit more clearance for the intake elbow (not needed, but I wanted the intake to point down ward a bit more to get the front alignment I was going for. It works out nicely and cleans up look even more.

Thanks for the feedback. Very much appreciated. I have always been a fan of GruppeM quality and am glad we have managed raised the bar.

JCF · 02-25-2015, 08:32 AM

I caved....

inTgr8r · 02-25-2015, 08:57 AM

^

I love mine & I haven't even installed it yet

Pheonix · 02-25-2015, 10:49 AM

Quote:

Originally Posted by PLCZ4M

I really want one errr. It is $800 total now I think to U.S.
I might have to put my Afe and my Rpi scopp on sale soon if I wanna get one.

With the favorable US Dollar, i was able to purchase the Gruppe M from oversea vendor for less than $800 shipped!
I really wanted the Evolve intake but decided to stick with the Gruppe M since i have seen and heard it in person and preferred Gruppe M's sound.
Kudo to Evolve for making parts for our cars! Next step might be the Airbox.

DRedman45 · 03-07-2015, 05:08 PM

Here's my black powdercoated stealthy scoop

02-20-2015, 11:05 AM	#47
inTgr8r Lieutenant General 2426 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	definitely __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

02-20-2015, 12:29 PM	#48
RossBMWZseries Major 224 Rep 1,130 Posts Drives: '11 E92 328i LCI & '06 Z4MR Join Date: Jun 2014 Location: San Juan TX iTrader: (1) Garage List 2006 BMW Z4M Roadster [7.00]	I hate "all y'all!" I wish I had a CF intake
	Appreciate 0 Quote

02-22-2015, 02:45 PM	#51
Z4Murder Major 28 Rep 1,110 Posts Drives: > speed limit Join Date: Apr 2010 Location: Buffalo, NY iTrader: (1)	Got mine the other day. I was impressed with the attention to detail on the packaging and the product itself. Good work Eventuri crew, I can't wait to install once the horrible weather goes away. __________________ 2007 TiAg ///MCoupe * Dinan strut bars * ZHP knob * RPI scoop * Ultimate Pedals * RE Diablo * 3.91 TMS gears * Apex PS7 * Eventuri intake* Nitto NT05 * TMS pullies * Zeck CDV * RE tranny mounts * Tekarbon * Mstache 2 * '14 Jeep Grand Cherokee Overland Hemi... No more snow for the M! Last edited by Z4Murder; 03-09-2015 at 05:48 PM..
	Appreciate 0 Quote

02-23-2015, 06:40 PM	#53
crfine88 Colonel 441 Rep 2,747 Posts Drives: E86M Join Date: Jan 2009 Location: Cave Creek AZ. iTrader: (19)	Installed #058 this weekend! This is really a top notch kit. The fit and finish exceeded my expectations. The Eventuri kit is leaps an bounds ahead of the GruppeM I had run. Until now, GruppeM kit had been the nicest availiable for our cars. Boths Kits sound awesome, but the Eventuri is on another level when it construction and appearance. Way to raise the bar guys! For the install, I ended up relocating the coolant line beneath the intake. I removed the tab and added the clip to a stock bracket location. I also notched this bracket to add a bit more clearance for the intake elbow (not needed, but I wanted the intake to point down ward a bit more to get the front alignment I was going for. It works out nicely and cleans up look even more. __________________ LINK TO 07 IR PHOTO JOURNAL:http://www.zpost.com/forums/showthread.php?t=1303735 LINK TO 06 IB MOD JOURNAL:http://www.zpost.com/forums/showthread.php?t=403119
	Appreciate 0 Quote

02-23-2015, 07:38 PM	#54
inTgr8r Lieutenant General 2426 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	Sounds great Chris. The coolant line was on my to do list as well. __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

02-24-2015, 09:23 AM	#58
XMetal Colonel 1130 Rep 2,866 Posts Drives: Anything Join Date: Apr 2010 Location: SoCal iTrader: (0) Garage List 2008 Z4M Coupe [10.00] 2018 Audi S3 [0.00] 2004 X5 [8.50]	That's eventually what I ended up doing (rotating the elbow as much as it will go clockwise) to get the added clearance.
	Appreciate 0 Quote

02-24-2015, 11:44 AM	#60
PLCZ4MC Proud E86M Owner 79 Rep 650 Posts Drives: 07 Z4M Coupe Monaco Blue Join Date: Sep 2013 Location: South California iTrader: (4)	I really want one errr. It is $800 total now I think to U.S. I might have to put my Afe and my Rpi scopp on sale soon if I wanna get one.
	Appreciate 0 Quote

02-25-2015, 08:32 AM	#63
JCF Second Lieutenant 32 Rep 218 Posts Drives: 07 Z4 M Coupe Join Date: Jan 2015 Location: Charlotte, NC iTrader: (0)	I caved....
	Appreciate 0 Quote

02-25-2015, 08:57 AM	#64
inTgr8r Lieutenant General 2426 Rep 11,667 Posts Drives: M2 Comp Join Date: Mar 2006 Location: Toronto iTrader: (10)	^ I love mine & I haven't even installed it yet __________________ '21 M2C Hockenheim Silver '18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold)
	Appreciate 0 Quote

03-07-2015, 05:08 PM	#66
DRedman45 Lieutenant 35 Rep 441 Posts Drives: E86 //M coupe Join Date: Oct 2012 Location: Northern va iTrader: (0)	Here's my black powdercoated stealthy scoop Attached Images __________________ 2007 //M Coupe. BSM. Fabspeed headers. Catless. BMS x-pipe. Strömung cans. evolve tune. Turner CSL airbox. Airrex air suspension with autopilot v2 management. My Build Thread
	Appreciate 0 Quote