|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
01-16-2017, 03:41 PM | #1 |
Registered
0
Rep 3
Posts |
I have a question for everyone, I have a 2005 BMW Z4 2.5i. About 2 months ago my car started to give problems. When I push the brake the engine would rev up sometimes to the point at a stop I have to put it in park. When I let the brake off it almost dies. The car is an automatic not a stick. Not that I beat my car but when you put the car in drive hit the brake and than hit the gas it does nothing and I mean nothing it`s like the gas pedal is not hooked to anything. I drive this car every day over 100miles I really need to fix it can anyone please point me in the right place...... It is showing codes but from my research some codes could mean a lot of things....... HELP
PS I do all the work on my car so if someone could please help....... The codes I get are po174,po171,po102,po1447 I cleared all the codes today waiting until tomorrow to see if they come back but the problem with the car is still there....... I rebuilt vanos over the weekend power better problem still there.... Last edited by whoath; 01-16-2017 at 04:54 PM.. |
01-16-2017, 03:55 PM | #2 |
Captain
723
Rep 912
Posts |
It may sound silly, but are you sure the floor mat isn't somehow hooking or depressing the gas when you hit the brake?
If thats not it...post the codes. That's a start. |
Appreciate
0
|
01-16-2017, 04:47 PM | #3 |
Registered
0
Rep 3
Posts |
No you don`t understand the engine does not rev at all as I let the brake off it will take off like it`s a switch at a point on the brake pedal to tell the gas pedal to work.
|
Appreciate
0
|
01-16-2017, 04:54 PM | #4 |
Private First Class
45
Rep 148
Posts |
Not a mechanic but sounds like a vacuum problem. My guess would be that you have a leak in the air intake or in a vacuum hose somewhere... Sorry I can't be of more help...
|
Appreciate
0
|
01-16-2017, 06:25 PM | #6 |
Private First Class
21
Rep 110
Posts |
P0174-oxygen sens lean bank 2.
P0171- system 2 lean bank 1 P0102- mass air fliw sensor/low input sensor. p01447- evap. code. Check vacuum leak while car is running by spraying carb/throttle body cleaner around throttle body/intake manifold. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|