Volunteer Test Vehicles Needed for EC-7 Wheels

Eddy@ApexRaceParts · 05-01-2012, 05:05 PM

The EC-7 wheel prototypes are here in 13 sizes, 7 of which are new to APEX, so we are looking for a wide range of vehicles to test these wheels on. If you are willing to travel to Livermore (San Francisco Eash Bay) for some test fitting and photos, then please contact us. This is a great opportunity to see this new wheel design on your own car, and to confirm fitment.

Some wheels are made in specialty sizes/offsets that require specific modifications for proper installation, Below is a list of vehicles we are interested in, along with the required or preferred modifications for each vehicle type.

1 Series: camber plates required, BBK preferred

1 series: lowering springs only

E36 M3: camber plates required, BBK preferred

E36 M3: Camber plates required, front/rear fenders rolled/flarred to fit 18x10's with 285's

E46 non-m: camber plates required, BBK preferred

E46 M3: camber plates required, Brembo 380mm required

E46 M3: camber plates required, 355mm BBK required

E9X non-m: camber plates required, BBK required

E9X non-m: only lowered suspension.

E9X M3: Brembo 380 BBK required

Z3 M: camber plates required

Z4 non-m: camber plates required

Z4 M: camber plates required, BBK Required

Z4 M: lowering springs only

If you would like to volunteer please contact us at: info (at) apexraceparts (dot) com and title your email "EC-7 test vehicle".

http://www.myapexparts.com/2012/05/0...r-ec-7-wheels/

mfanatic325 · 05-02-2012, 01:40 AM

No BBKs, and I have more than just lowering springs unfortunately, otherwise I'd help out

Eddy@ApexRaceParts · 05-03-2012, 09:00 PM

Quote:

Originally Posted by mfanatic325

No BBKs, and I have more than just lowering springs unfortunately, otherwise I'd help out

Looking at your mod list, your car would actually work. We'd continue to look for a car with a BBK, but having TCK's with plates allows for important testing of new offsets.

PM sent.

mfanatic325 · 05-03-2012, 09:09 PM

Yay, I'm no reject. My life is whole again

See you guys next Friday?

gferil · 05-03-2012, 10:33 PM

Lon, I think I am chosen as one of the Z4M's that's "close to stock", might be able to make it there on Friday afternoon, so maybe I'll see you there!

mfanatic325 · 05-04-2012, 11:30 AM

Quote:

Originally Posted by gferil

Lon, I think I am chosen as one of the Z4M's that's "close to stock", might be able to make it there on Friday afternoon, so maybe I'll see you there!

I'm going in during the morning (well before lunch) however

05-01-2012, 05:05 PM	#1
Eddy@ApexRaceParts Drives: E30 M3, E34 540i/6, Cooper S Join Date: Jun 2009 Location: Bay Area, CA Posts: 1,499 iTrader: (3)	Volunteer Test Vehicles Needed for EC-7 Wheels The EC-7 wheel prototypes are here in 13 sizes, 7 of which are new to APEX, so we are looking for a wide range of vehicles to test these wheels on. If you are willing to travel to Livermore (San Francisco Eash Bay) for some test fitting and photos, then please contact us. This is a great opportunity to see this new wheel design on your own car, and to confirm fitment. Some wheels are made in specialty sizes/offsets that require specific modifications for proper installation, Below is a list of vehicles we are interested in, along with the required or preferred modifications for each vehicle type. 1 Series: camber plates required, BBK preferred 1 series: lowering springs only E36 M3: camber plates required, BBK preferred E36 M3: Camber plates required, front/rear fenders rolled/flarred to fit 18x10's with 285's E46 non-m: camber plates required, BBK preferred E46 M3: camber plates required, Brembo 380mm required E46 M3: camber plates required, 355mm BBK required E9X non-m: camber plates required, BBK required E9X non-m: only lowered suspension. E9X M3: Brembo 380 BBK required Z3 M: camber plates required Z4 non-m: camber plates required Z4 M: camber plates required, BBK Required Z4 M: lowering springs only If you would like to volunteer please contact us at: info (at) apexraceparts (dot) com and title your email "EC-7 test vehicle". http://www.myapexparts.com/2012/05/0...r-ec-7-wheels/
	Tweet

05-02-2012, 01:40 AM	#2
mfanatic325 ///M-fanatic Drives: '07 Z4MC, '04 325Ci Join Date: Oct 2007 Location: Cupertino, CA. Posts: 3,331 iTrader: (18) Garage List 2007 BMW Z4M Coupe [4.45]	No BBKs, and I have more than just lowering springs unfortunately, otherwise I'd help out __________________ VF570 S/C\|TIAL BOV\|SetRabCooler\|Brembo GT 6/4\|TE37s\|NT05s\|3.91 Gearing\|TCK D/A\|RPi Induction\|SS Race Mufflers/X-pipe\|JVT Headers\|AS SSK\|Sparco Pro2000/6pt.Harness\|MS FloorMounts\|SE Custom Harness Bar\|Tekarbon Angels\|M-Tech Pedals\|OE Strut Bar\|RE RSMs\|8000K D2S\|CDV DEL\|CF Roof Wrap\|MB Grills\|UUC TrannyMounts/ClutchStop\|V1 Mount\|P3C Gauge

05-03-2012, 09:09 PM	#4
mfanatic325 ///M-fanatic Drives: '07 Z4MC, '04 325Ci Join Date: Oct 2007 Location: Cupertino, CA. Posts: 3,331 iTrader: (18) Garage List 2007 BMW Z4M Coupe [4.45]	Yay, I'm no reject. My life is whole again See you guys next Friday? __________________ VF570 S/C\|TIAL BOV\|SetRabCooler\|Brembo GT 6/4\|TE37s\|NT05s\|3.91 Gearing\|TCK D/A\|RPi Induction\|SS Race Mufflers/X-pipe\|JVT Headers\|AS SSK\|Sparco Pro2000/6pt.Harness\|MS FloorMounts\|SE Custom Harness Bar\|Tekarbon Angels\|M-Tech Pedals\|OE Strut Bar\|RE RSMs\|8000K D2S\|CDV DEL\|CF Roof Wrap\|MB Grills\|UUC TrannyMounts/ClutchStop\|V1 Mount\|P3C Gauge

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-03-2012, 10:33 PM	#5
gferil Captain Drives: 06 Z4MC Join Date: Dec 2010 Location: San Francisco, CA Posts: 696 iTrader: (5)	Lon, I think I am chosen as one of the Z4M's that's "close to stock", might be able to make it there on Friday afternoon, so maybe I'll see you there!