|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
09-18-2016, 03:00 PM | #1 |
Lieutenant General
2432
Rep 11,667
Posts |
Rolled your fenders? Add even more rear clearance
I found that when I rolled the rear fenders that I was restricted quite a bit where the fender and rear bumper come together.
I ended up with a bit of a dimple in that area due to the restriction and have seen several others the same. Aside from the cosmetics, this is where tires will still rub when trying to max out the wheel fitment. I found a fix that gains at least 1/4" or more. This the area after the fix ......dimple is gone ...and here is what I adjusted. - first you need to pull out the inner liner Then you will see a single bolt where the bracket for the bumper clip is fastened. Just loosen it off & pry the clip out. This is with the bolt removed and shows the original position and how much it can move out without any modification..
__________________
'21 M2C Hockenheim Silver
'18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold) Last edited by inTgr8r; 09-18-2016 at 05:12 PM.. |
09-19-2016, 10:14 AM | #4 |
Lieutenant General
2432
Rep 11,667
Posts |
I forgot to add that I also dremeled some of the end off of metal bracket.
this was too close to the tire for my liking.
__________________
'21 M2C Hockenheim Silver
'18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold) |
Appreciate
0
|
09-23-2016, 09:33 AM | #6 | |
First Lieutenant
37
Rep 398
Posts |
Quote:
Thanks for the tip!
__________________
BSM Z4M Coupe
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|