|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
06-02-2012, 02:05 PM | #1 |
Second Lieutenant
13
Rep 280
Posts |
FS - 3 EGT Bungs 316 SS
I had to buy 4 to meet the minimum order, so I have 3 left over. You will need to cut the adapter as shown in the picture. I'll cut it for you, but it's gonna cost ya $5. Otherwise, $20 shipped to the lower 48. PM to get one. I'll be out for the next 2 days fishing, so response will be slow. 14x1.5 thread, 316 SS!! No spray paint required - that looks like crap. Use 316 filler rod. |
06-03-2012, 06:25 PM | #2 |
Second Lieutenant
13
Rep 280
Posts |
They be all gone, thanks guys!!
If you want more, let me know, and if I get 5 or more folks, I'll make another purchase on behalf of the Z4 crew. |
Appreciate
0
|
06-08-2012, 08:24 AM | #5 |
Second Lieutenant
13
Rep 280
Posts |
Quick update, and a neat source for the parts if you need them....
I pulled the mid pipe and did all the welding. I put it back in before I replaced the headers. So, I had to put 2 old O2 sensors in as plugs, and needed the 14x1.5mm cap to cover the egt hole. I start scouring my bin of fittings, and find a cap that fits perfect. The cap is for a steering fitting for a mercury verado outboard motor. The fitting that goes to the steering cylinder is what you need (225 - 350 HP size). If you have a local mercury verado dealer (go to their site) they probably have a few laying around form motor installs. They are 316 SS as well. Would do the same thing. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|