|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
06-12-2010, 09:08 PM | #1 |
Lieutenant
25
Rep 457
Posts |
Euro Front bumper swap? DIRECT swap or not so much?
Searched but results weren't fruitful.
Long story short, my cpo'd car showed up with minor front bumper damage. Dealer owes me a check for new front bumper. I'm willing to pay out of pocket for any cost difference of a euro front bumper, but need to know FOR SURE that it will be a direct swap and no fitment issues with mounting points, etc. Anybody have FIRST HAND experience with this? I don't want to hear that your uncle's baby's dog sitter's sister had it done at xyz's shop back in the day... you get the idea. All this with the assumption I can possibly through some connections get around getting a euro part shipped here from a euro dealer. Thanks.
__________________
|
06-12-2010, 09:24 PM | #2 |
Lieutenant General
2282
Rep 12,565
Posts
Drives: Z4 M, X5, GX460
Join Date: Apr 2008
Location: CT
iTrader: (99)
Garage List F15 X5 xDrive35i [8.75]
E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.22] |
Stupid question bur what's the difference between US and euro bumpers?
|
Appreciate
0
|
06-13-2010, 01:36 AM | #3 |
Major
74
Rep 1,143
Posts |
|
Appreciate
0
|
06-13-2010, 01:38 PM | #4 |
Lieutenant
25
Rep 457
Posts |
Yup, that's the main difference. Now trying to find out if anybody knows first hand if there are any subtle differences esp regarding fitment.
__________________
|
Appreciate
0
|
06-14-2010, 01:12 AM | #5 |
Member BMW CCA Los Angeles
32
Rep 470
Posts
Drives: 2022 M8 GC Comp
Join Date: Oct 2008
Location: Trabuco Canyon, CA
|
Might want to ask a body shop what they would charge to fill in the reflector holes and paint. A few people have done this will good results.
__________________
Current Rides:
2022 ///M8 GC Comp Much enjoyed: 2018 ///M4 ZCP || 2014 ///M5 ZCP || 2011.5 ///M3 Sedan || 2007 ///M Coupe || 2008 550i Sport || 2006 ///M3 ZCP || 2008 X3 3.0si || 2006 325i || 2003 Z4 3.0 Roadster || 2003 330ci || 2002 325i |
Appreciate
0
|
06-14-2010, 07:24 AM | #6 |
Lieutenant General
2426
Rep 11,667
Posts |
No differences on fitment.
IIRC someone else looked into this and found it prohibitively expensive. It's easier to just get them filled and the bumper repainted. That's my plan including the headlight washers delete.
__________________
'21 M2C Hockenheim Silver
'18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold) |
Appreciate
0
|
06-21-2010, 12:22 AM | #7 |
Lieutenant
25
Rep 457
Posts |
Got a name of the person? I would rather have the real deal bumper rather than get them filled in. Local certified bmw repair/body shop isn't too keen on the idea of filling them in.
__________________
|
Appreciate
0
|
06-21-2010, 12:52 AM | #8 |
Major
88
Rep 1,090
Posts |
shouldn't be that pricey. I think my new front bumper cost AUD$890 and this is Australia where all bmw parts are about 3-5x higher than the US.
__________________
135i N54 manual
MR-S with a 2zz swap and mods Sold EVO X MR - Phantom Black - Ti Exhaust - Ti UICP - AQM Intake - Sold Z4 M Coupe - H&R - RE Diablo - RPi - Tekarbon - Sold |
Appreciate
0
|
07-01-2010, 04:08 AM | #10 |
1M advocate
214
Rep 878
Posts |
I did it on my e46 m3, it was only about $100 more expensive then the stock ugly US spec one.
Im going to do it in the future, I hate the reflectors.
__________________
2012 BMW S1000RR
2011 BMW M3 |
Appreciate
0
|
07-01-2010, 07:22 AM | #11 |
Major
74
Rep 1,143
Posts |
I was under the impression that BMW had put a block on all Euro parts ordered from the US, per some post I saw here. Mike, let me know how it works out. I'll be seriously kicking myself if that's not the case, because I was charged 4 hours of labor which was certainly more than $100. FWIW, the body shop did a nice job -- I think they said they cut a piece of plastic to patch up the hole on the back side, and then filled it in to be flush with the rest of the bumper. It's completely seamless as far as I could tell, but I've yet to mount it on the car and take a look in daylight. I'll try to take a picture of it front/back when I get home.
|
Appreciate
0
|
07-03-2010, 02:49 PM | #13 |
Lieutenant General
2426
Rep 11,667
Posts |
Does the euro still have the HL washers?
If that's the case it doesn't help me anyway.
__________________
'21 M2C Hockenheim Silver
'18 718 Cayman S Lava Orange (sold) '13 E92 M3 Santorini Blue (sold) '07 Z4 M Coupe Alpine White (sold) |
Appreciate
0
|
07-05-2010, 12:57 PM | #14 |
Lieutenant
25
Rep 457
Posts |
I hope so, if they don't then it won't help me. Ha.
__________________
|
Appreciate
0
|
07-05-2010, 03:19 PM | #15 | |
Major
74
Rep 1,143
Posts |
Quote:
http://www.zpost.com/forums/showthread.php?t=128689 http://www.zpost.com/forums/showthread.php?t=382945 |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|