|
|
SUPPORT ZPOST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
Post Reply |
|
Thread Tools | Search this Thread |
01-14-2017, 09:56 PM | #1 |
Captain
510
Rep 911
Posts |
Max steering angle at HDPE/Roadcoarse
Looking for some input on maximum expected steering angle on average road coarse situations. On my Supra, I found myself steering almost 120 degrees on one or two corners, depending how deep I would enter them. Do most of you never exceed 90deg?
Reason for asking: I'm testing fitment of some wheels, removed my springs, and am trying to clear fender/liner obstructions. At 180 deg steering angle, I'm doing good at maximum compression, but anything more than that and these wheels will rip the fenders out!
__________________
Andre - 2J into a Z4 Coupe!
|
01-16-2017, 12:04 PM | #2 |
Captain
249
Rep 758
Posts |
Even if you don't exceed the 180 under normal conditions if you spin or have an "off" it's likely you're going farther than that IMHO.
__________________
Top Down 365
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|