▀▄ eas

brandon @ eas · 07-23-2009, 08:42 PM

As your authorized US Recaro dealer, we are proud to be able to offer you some unique packages, specific to e9x BMW's, full warranty and fresh inventory. As you may know, Recaro is widely used as a high end option OEM application by many car manufacturers such as:

BMW, Audi, Mercedes Benz, Porsche, Saleen, Lotus, Volkswagen, Mitsubishi, Ford, Honda, Ferrari, Alfa Romero, and Aston Martin to name a few.

Here are a few facts about Recaro:

-Designed by Orthopedic doctors
-2 year warranty on materials/labor
-Insured by BMW/Recaro (TUV) $5mil liability
-Recaro's sit slightly lower than stock seats to allow for helmet clearance, and a lower center of gravity
-Huge weight savings over stock seats- 40lbs savings per seat when using Pole Positions

We offer a wide assortment of Recaro seats, and stock many of them in our facility, along with all the installation materials needed.

Here are a few options that we carry:

What will you need to have these mounted in your vehicle? Two sets of floor mounts, a seat belt receptacle for each seat or racing harness tabs, an OC3 module to disable the passenger air bag, and get rid of error messages, and Recaro sliders and side mounts for each seat (not needed for Sportster seats)

RECARO - Slider Track Kit
http://www.europeanautosource.com/pr...oducts_id=2165

Macht Schnell - Competition Liteweight Floor Mounts for Racing Seats - Black Anodized
http://www.europeanautosource.com/pr...oducts_id=2325

Macht Schnell - OC3 Seat Occupancy Sensor Emulation Module
http://www.europeanautosource.com/pr...oducts_id=2330

RECARO - Aluminum Adapter for Profi XL, Pro Racer Hans SPG XL, Pro Racer Hans SPA XL and Pole Position (FIA Certified)
http://www.europeanautosource.com/pr...oducts_id=2170

RECARO - Steel Adapter for Profi XL, Pro Racer Hans SPG XL, Pro Racer Hans SPA XL and Pole Position (FIA Certified)
http://www.europeanautosource.com/pr...oducts_id=2169

Macht Schnell - Seat Belt Receptacle for Competition Liteweight Floor Mounts (Left Side)
http://www.europeanautosource.com/pr...oducts_id=2328

Macht Schnell - Seat Belt Receptacle for Competition Liteweight Floor Mounts (Right Side)
http://www.europeanautosource.com/pr...oducts_id=2329

Macht Schnell - Harness Receptacles for Competition Liteweight Floor Mounts (pair)
http://www.europeanautosource.com/pr...oducts_id=2327

More information can be found in the track/racing section of our website.

PM me directly or give me a call for more color options, questions, or to get an order started

brandon @ eas · 07-23-2009, 08:42 PM

Full Leather Pole Positions in an e92 M3:

brandon @ eas · 07-23-2009, 08:43 PM

Check out this jaw dropping set of Sportster CS's in full leather that went out today:

weighing in at 35lbs per seat!

Quick release tab to fold seat

Hard ABS shell to complete an OEM look, feel and finish

Amazing side profile

E82tt6 · 07-23-2009, 11:01 PM

Love the Sportster CS!

david @ eas · 09-22-2009, 03:56 PM

Quote:

Originally Posted by E82tt6

Love the Sportster CS!

We love it too!

Thanks for the PM's guys! Let me know if you have any other questions.

Recklessz4 · 09-22-2009, 07:45 PM

Sportster CS's in full leather for z4 3.0 with all hardware shipped to 11420.. need asap

david @ eas · 09-22-2009, 07:47 PM

Quote:

Originally Posted by Recklessz4

Sportster CS's in full leather for z4 3.0 with all hardware shipped to 11420.. need asap

PM coming shortly.

brandon @ eas · 10-08-2009, 03:48 PM

Pole positions are currently in stock!

anthony @ eas · 11-17-2009, 03:55 PM

We now have Z4/Z4M specific Macht Schnell floor mounts available.

Macht Schnell - Z4/Z4M Competition Liteweight Floor Mounts for Racing Seats - Clear Anodized
http://www.europeanautosource.com/pr...oducts_id=2421

Macht Schnell - Z4/Z4M Competition Liteweight Floor Mounts for Racing Seats - Black Anodized
http://www.europeanautosource.com/pr...oducts_id=2420

Some pictures of a test fitment:

MC 357 · 01-30-2010, 02:56 PM

So we need the floor mount recaro sliders and the seat mounts...
btw will the recaro sliders work with other seat mounts? i have a set of buddy club super low seat mounts, just wondering if they were universal.

EAS · 03-22-2010, 04:05 PM

Quote:

Originally Posted by Type R 564

So we need the floor mount recaro sliders and the seat mounts...
btw will the recaro sliders work with other seat mounts? i have a set of buddy club super low seat mounts, just wondering if they were universal.

You need recaro mounts for the sliders to work correctly. I'm sure you can figure out a way to use it with other ones, but they aren't meant to so there might be problems with your sliders if you choose to do this.

david_lm · 04-14-2010, 11:02 PM

Very tempting. Just curious, how much for all black Recaro Sportster CSs with all hardware shipped to 98108. Thanks in advance!

Car is a Z4M.

EAS · 04-15-2010, 02:29 PM

Quote:

Originally Posted by david_lm

Very tempting. Just curious, how much for all black Recaro Sportster CSs with all hardware shipped to 98108. Thanks in advance!

Car is a Z4M.

PM on the way

david @ eas · 07-07-2010, 12:50 PM

Thanks for the inquiries guys. If you have any further questions, please feel free to ask!

Blind32 · 07-07-2010, 01:07 PM

What is the weight of a stock Z4M power seat?

david @ eas · 07-07-2010, 01:16 PM

Quote:

Originally Posted by Blind32

What is the weight of a stock Z4M power seat?

They're actually around the same weight as the E46 M3 seats which range between 50-60 pounds each depending on if you have heated seats. They are quite heavy especially when compared to a pole position (about 17lbs a seat).

Master Apex · 07-26-2010, 09:54 PM

Z4M Stock seat shoulder width is 19.5", the Recaro PP or Profi dimension is wider (22") so do they rub the door or inhibit access to the center storage?

Does the Macht Schnell - Seat Belt Receptacle for Competition Liteweight Floor Mounts (Left Side) work with VAC floor mount?

Does the Macht Schnell - OC3 Seat Occupancy Sensor Emulation Module work on driver side with Recaro Profi?

Does Sparco slider fit the Macht Schnell floor mount and Recaro Profi?

EAS · 07-27-2010, 12:37 PM

Quote:

Originally Posted by Master Apex

Z4M Stock seat shoulder width is 19.5", the Recaro PP or Profi dimension is wider (22") so do they rub the door or inhibit access to the center storage?

Does the Macht Schnell - Seat Belt Receptacle for Competition Liteweight Floor Mounts (Left Side) work with VAC floor mount?

Does the Macht Schnell - OC3 Seat Occupancy Sensor Emulation Module work on driver side with Recaro Profi?

Does Sparco slider fit the Macht Schnell floor mount and Recaro Profi?

We have not tested the Macht Schnell floor mounts with the Sparco Sliders, nor have we tested the Macht Schnell Seat Belt Receptacle on a VAC Floor Mount. As for seats that will fit, we've only tested the Recaro Pole Position, and not the Profi inside a Z4M. The OC3 Seat Occupancy Sensor Emulation Module is not compatible with your vehicle. Hope that helped!

07-23-2009, 08:42 PM	#1
brandon @ eas 526 Rep 3,612 Posts Drives: F30 335i Join Date: Aug 2007 Location: Anaheim, CA iTrader: (10)	▀▄ eas - Recaro racing seats: Complete set ups As your authorized US Recaro dealer, we are proud to be able to offer you some unique packages, specific to e9x BMW's, full warranty and fresh inventory. As you may know, Recaro is widely used as a high end option OEM application by many car manufacturers such as: BMW, Audi, Mercedes Benz, Porsche, Saleen, Lotus, Volkswagen, Mitsubishi, Ford, Honda, Ferrari, Alfa Romero, and Aston Martin to name a few. Here are a few facts about Recaro: -Designed by Orthopedic doctors -2 year warranty on materials/labor -Insured by BMW/Recaro (TUV) $5mil liability -Recaro's sit slightly lower than stock seats to allow for helmet clearance, and a lower center of gravity -Huge weight savings over stock seats- 40lbs savings per seat when using Pole Positions We offer a wide assortment of Recaro seats, and stock many of them in our facility, along with all the installation materials needed. Here are a few options that we carry: What will you need to have these mounted in your vehicle? Two sets of floor mounts, a seat belt receptacle for each seat or racing harness tabs, an OC3 module to disable the passenger air bag, and get rid of error messages, and Recaro sliders and side mounts for each seat (not needed for Sportster seats) RECARO - Slider Track Kit http://www.europeanautosource.com/pr...oducts_id=2165 Macht Schnell - Competition Liteweight Floor Mounts for Racing Seats - Black Anodized http://www.europeanautosource.com/pr...oducts_id=2325 Macht Schnell - OC3 Seat Occupancy Sensor Emulation Module http://www.europeanautosource.com/pr...oducts_id=2330 RECARO - Aluminum Adapter for Profi XL, Pro Racer Hans SPG XL, Pro Racer Hans SPA XL and Pole Position (FIA Certified) http://www.europeanautosource.com/pr...oducts_id=2170 RECARO - Steel Adapter for Profi XL, Pro Racer Hans SPG XL, Pro Racer Hans SPA XL and Pole Position (FIA Certified) http://www.europeanautosource.com/pr...oducts_id=2169 Macht Schnell - Seat Belt Receptacle for Competition Liteweight Floor Mounts (Left Side) http://www.europeanautosource.com/pr...oducts_id=2328 Macht Schnell - Seat Belt Receptacle for Competition Liteweight Floor Mounts (Right Side) http://www.europeanautosource.com/pr...oducts_id=2329 Macht Schnell - Harness Receptacles for Competition Liteweight Floor Mounts (pair) http://www.europeanautosource.com/pr...oducts_id=2327 More information can be found in the track/racing section of our website. PM me directly or give me a call for more color options, questions, or to get an order started
	Appreciate 0 Tweet Quote

07-23-2009, 08:42 PM	#2
brandon @ eas 526 Rep 3,612 Posts Drives: F30 335i Join Date: Aug 2007 Location: Anaheim, CA iTrader: (10)	Full Leather Pole Positions in an e92 M3:
	Appreciate 0 Quote

07-23-2009, 08:43 PM	#3
brandon @ eas 526 Rep 3,612 Posts Drives: F30 335i Join Date: Aug 2007 Location: Anaheim, CA iTrader: (10)	Check out this jaw dropping set of Sportster CS's in full leather that went out today: weighing in at 35lbs per seat! Quick release tab to fold seat Hard ABS shell to complete an OEM look, feel and finish Amazing side profile
	Appreciate 0 Quote

07-23-2009, 11:01 PM	#4
E82tt6 Colonel 109 Rep 2,626 Posts Drives: '08 Black Saphire Z4 MC Join Date: Oct 2007 Location: New Jersey iTrader: (0)	Love the Sportster CS! __________________ '08 Black Saphire/Black Z4 M Coupe RIP Gretta: Blue Water/Lemon 135i. Died to save me. -ChuckV
	Appreciate 0 Quote

09-22-2009, 07:45 PM	#6
Recklessz4 Private 4 Rep 76 Posts Drives: 2006 BMW Z4 Join Date: Oct 2008 Location: NYC iTrader: (0)	Sportster CS's in full leather for z4 3.0 with all hardware shipped to 11420.. need asap
	Appreciate 0 Quote

10-08-2009, 03:48 PM	#8
brandon @ eas 526 Rep 3,612 Posts Drives: F30 335i Join Date: Aug 2007 Location: Anaheim, CA iTrader: (10)	Pole positions are currently in stock!
	Appreciate 0 Quote

11-17-2009, 03:55 PM	#9
anthony @ eas 318 Rep 3,635 Posts Drives: R56 Cooper S Join Date: May 2009 Location: 4015 E Leaverton Court, Anahiem, CA 92807 iTrader: (0)	We now have Z4/Z4M specific Macht Schnell floor mounts available. Macht Schnell - Z4/Z4M Competition Liteweight Floor Mounts for Racing Seats - Clear Anodized http://www.europeanautosource.com/pr...oducts_id=2421 Macht Schnell - Z4/Z4M Competition Liteweight Floor Mounts for Racing Seats - Black Anodized http://www.europeanautosource.com/pr...oducts_id=2420 Some pictures of a test fitment:
	Appreciate 0 Quote

01-30-2010, 02:56 PM	#10
MC 357 Private 17 Rep 81 Posts Drives: R53 Cooper S/I3 Join Date: May 2009 Location: SoCal iTrader: (0)	So we need the floor mount recaro sliders and the seat mounts... btw will the recaro sliders work with other seat mounts? i have a set of buddy club super low seat mounts, just wondering if they were universal.
	Appreciate 0 Quote

04-14-2010, 11:02 PM	#12
david_lm Go Ducks! 16 Rep 399 Posts Drives: 06 Z4Mr Join Date: Apr 2007 Location: Lynnwood iTrader: (1)	Very tempting. Just curious, how much for all black Recaro Sportster CSs with all hardware shipped to 98108. Thanks in advance! Car is a Z4M. __________________ David . MY2006 IB Z4Mr
	Appreciate 0 Quote

07-07-2010, 12:50 PM	#14
david @ eas 266 Rep 4,048 Posts Drives: BMW Join Date: Mar 2008 Location: Anaheim iTrader: (5)	Thanks for the inquiries guys. If you have any further questions, please feel free to ask!
	Appreciate 0 Quote

07-07-2010, 01:07 PM	#15
Blind32 Certified Adrenaline Junkie 43 Rep 1,325 Posts Drives: '07 Z4MC Join Date: Sep 2009 Location: Dallas TX iTrader: (2)	What is the weight of a stock Z4M power seat?
	Appreciate 0 Quote

07-26-2010, 09:54 PM	#17
Master Apex Private 19 Rep 99 Posts Drives: '17 F80 M3 '07 Z4M '06 E60M5 Join Date: Apr 2010 Location: Austin, TX iTrader: (0)	Z4M Stock seat shoulder width is 19.5", the Recaro PP or Profi dimension is wider (22") so do they rub the door or inhibit access to the center storage? Does the Macht Schnell - Seat Belt Receptacle for Competition Liteweight Floor Mounts (Left Side) work with VAC floor mount? Does the Macht Schnell - OC3 Seat Occupancy Sensor Emulation Module work on driver side with Recaro Profi? Does Sparco slider fit the Macht Schnell floor mount and Recaro Profi?
	Appreciate 0 Quote