infamous 3000 rpm rattle!

[XMetal]

FYI - This is all the parts that I bought when "Kaiv" helped me rebuilt mine:

*** VANOS Rebuild (Beisan) Parts list ***
S54 Vanos Seals Repair Kit (BS021) - 1x
S54 Vanos Rattle Repair Kit (BS022) - 1x
S54 Vanos Sealing Plate Repair Kit (BS024) - 1x
S54 Vanos Oil Pump Disk (BS025) - 1x
Gasket Steel (11367831938) - 1x
Gasket rings for Vanos Banjo Bolt (07119963072) - 2x
Chain tensioner (11317830159) 1x
Gasket ring for Chain tensioner (07119963342) - 1x
Chain tensioner washer (07119963418) - 1x
Camshaft bolts (07129905536) - 12x
S62 diaphragm springs (11367833218) - 2x
VANOS Filter Cartridge (11361401971) - 1x

[SaltyNC]

Originally Posted by milamookie

Awesome! Those are on the list already. I'm trying to get used to all the terminology with all the parts in that area. Btw, I was going to get these bolts from ECS, do you know if those are the upgraded ones? They have Torx heads so I'm assuming they are but ECS doesn't state such

https://www.ecstuning.com/b-genuine-...7129905536kt3/

If you think there are other better bolts out there I'm open to suggestions

Those are the ones I went with. I think Lang sells some, but I may be wrong about that. We also put a little Loctite on the torx bolts.

Salty

[StickMon]

^Yep. I actually have 12.9 hex heads from McMaster. ECS doesn't really say.

[SaltyNC]

Originally Posted by XMetal

*** VANOS Rebuild (Beisan) Parts list ***

S62 diaphragm springs (11367833218) - 2x

Thanks for listing this. I was mistakenly saying S65 springs. I've corrected my posts in this thread. I've been spending too much time in the S65 forums reading about their bearing issues.

Salty