APEX ARC-8 light weight Track wheels (1000+ wheels in stock ready to ship)

[Eddy@ApexRaceParts]

18" APEX ARC-8 Track Wheels in stock ready to ship!

WWW.APEXRACEPARTS.COM
CLICK HERE FOR Z4 Fitment Wheels



These wheels are Flow-Formed (roll-forged barrel) and available in 4 popular finishes.
The low offset wheels have a deep concave face. Strength is a priority so the load rating has been set to 703KGS.

All the 18" wheel barrels were modifed in order to clear a stoptech 380mm BBK.

These wheels are available in 7 sizes:

18x8.5" et38 - 18.45lbs - $289
18x9.0" et42 - 18.65lbs - $299
18x9.5" et35 - 18.85lbs - $314
18x9.5" et22 - 19.10lbs - $314
18x10." et25 - 19.95lbs - $324
18x10.5" et25 - 20.45lbs - $344
17x8.5" et40 - 17.0 lbs - $249
17x9.0" et42 - 17.2 lbs - $259

Available in 4 finishes:

Hyper Silver
Hyper Black
Anthracite
Satin Black

Fitment for Z4 M

18x8.5" et38 wheels fit up front with great ease and either 235/40/18's or 245/40/18's.

18x9.0" et42 wheels also fit up front without the need for a spacer with 245/40/18 tires summer tires.
255/35/18 tires can be run on this size wheel, but a spacer may be needed.
Negative camber and spacers may be required depending on the 255 tire run as r-compounds and extreme summer tires can run wide.

18x9.5" et35 & et22 two offsets available, both work well, but the new et22 offset is the best fit.
They can be run with either 265/35/18 or 275/35/18 street tires or r-compounds.
The 9.5" et35 wheel can also be used up front with 245/35/18's or 255/35/18's with added negative camber.

18x10" et25 fit the rear with 275/35/18's with ease on stock and lowered cars.
R-compounds may have slight rubbing on the inner rear fender liner material.
This is a foam sound deadening material that can easily be trimmed or ignored.




















18x10" et25 Hyper Silver


18x9.5" et35 Hyper Black


18x9.5" et62 Anthracite


18x9" et42 Satin Black

[Eddy@ApexRaceParts]

We just shipped 12 sets today for two race teams. We're already starting to get low on inventory for certain colors. Get them while they're still in stock

[Eddy@ApexRaceParts]

Here are a few photos of a square 18x9.5" setup running 265/35/18 Michelin Pilot Sport Cup r-compounds all around

[Eddy@ApexRaceParts]

We have tons of 18x9's in stock. with a lot more of every size arriving in November. Get the 9.5's and 10's while there are still some left!

[Eddy@ApexRaceParts]

we still have a few 18x10" hyper black wheels in stock, but they are not listed online. There's still enough to complete a staggered set with either 8.5,9, or 9.5" front wheels

[MakoBimmer1]

for a great product and new pics of my car with these awesome wheels! 18x8.5F and 18x10R in HyperBlack.

[inTgr8r]

^ sweet

[psygnosis]

How's fitment for the non-M? Is there any reason I wouldn't want to use this as a street/summer wheel?

[Eddy@ApexRaceParts]

Originally Posted by psygnosis

How's fitment for the non-M? Is there any reason I wouldn't want to use this as a street/summer wheel?

You can't run the 18x10" wheels on the non-m, and even the 18x9.5" et35 is aggressive. Your best option is a square setup of 18x8.5" wheels. Those would fit cleanly.

[Eddy@ApexRaceParts]

We will have an 18x10.5" prototype wheel arriving in 1-1.5 weeks

[esqu1re]

What's prototype about them? Looks?

[Eddy@ApexRaceParts]

Originally Posted by esqu1re

What's prototype about them? Looks?

It's the first pull from the tooling in the new size and is untested, so it's not usable for any use other then photos due to it's lack of certification.

I could have said sample, but it's the word the engineers have been throwing around.

[dorifto88]

ttt... how impossible would it be to fit the 18x10s in the front if you are running coilovers?

[lrcigar]

Looks great on non-M's too

Hyperblack
F 18x8.5 225/40-18
R 18x9.0 255/35-18
Hankook V12

[Eddy@ApexRaceParts]

Originally Posted by dorifto88

ttt... how impossible would it be to fit the 18x10s in the front if you are running coilovers?

18x10 would be impossible basically, BUT you can get away with the 18x9.5" et35 up front, and honestly, that wheel can handle all the rubber you really need.

That could be either a square setup, or you could still stagger it with the 10" rears. Run something like a 265 front and 275 rear.

You must have camber plates to do this. Coilovers by themselves provide no additional clearance.

[Eddy@ApexRaceParts]

Originally Posted by lrcigar

Looks great on non-M's too

Hyperblack
F 18x8.5 225/40-18
R 18x9.0 255/35-18
Hankook V12

Thanks for the pic, the setup looks great. Will you be lowering the car soon?

[lrcigar]

Originally Posted by paintpro21

Thanks for the pic, the setup looks great. Will you be lowering the car soon?

I am considering it, but it will have to wait until next year. I'll be needing advice since I don't want to spend too much.

[Eddy@ApexRaceParts]

Most finishes are still in stock ready to ship. We have 3000 wheels in bound and arriving over the next few months!

[mhrir]

I should get a commission for the number of times I have seen my car being used to hawk these wheels

Seriously though, I used them for 8 DE events last year and they performed flawlessly. My only comment is that the APEX wheel centers melted at the track! I bought some OEM BMW caps and they can take the heat.

[mousitch]

Will the prototype 10.5" fit my Z4M? Im thinking yes. Will wait for the next group buy. Destroyed my last set in a substantial accident. Tough wheels. The right rear took on a tree and almost won! RIP baby

[Eddy@ApexRaceParts]

Originally Posted by mhrir

I should get a commission for the number of times I have seen my car being used to hawk these wheels

Seriously though, I used them for 8 DE events last year and they performed flawlessly. My only comment is that the APEX wheel centers melted at the track! I bought some OEM BMW caps and they can take the heat.

You have a rare fitment, and people need to see it, because honestly that's how the Z4M should be setup for track duty

about 5 other people who heavily track their car (almost always have a bbk) mentioned that their caps popped out from heat. We weren't offered a different plastic compound at the time, but have recently changed the plastic material to a higher heat resistant material. They've been placed onto the new wheels being produced, but I don't have a box of spares yet. I will ship you new ones as soon as I get extras in hand.

[Eddy@ApexRaceParts]

Originally Posted by mousitch

Will the prototype 10.5" fit my Z4M? Im thinking yes. Will wait for the next group buy. Destroyed my last set in a substantial accident. Tough wheels. The right rear took on a tree and almost won! RIP baby

The 10.5's would be aggressive for the Z4. By that I mean if you actually took advantage of their width with a wide tire, you would have a fitment issue. The 10's are the best wide fitment fitment for the Z4 M.

Group Buy info will be in a new post, and up in about 10 minutes