Another euro headers & euro cat install thread

[usaz4mcr8cr]

I have a set of euro headers and euro cats in transit.
After "exhausting" the search function (pun intended), I need some help with part #'s:

6 Header to engine gaskets
1 Header to S piping/euro cats gasket
1 S piping/euro cats to X piping gasket
4 heat shield clips for the O2 sensor wiring

also, will I need to wrap the O2 sensor wires to protect the from the heat after I unfold them? If so, what kind?

If there are any additional parts that I may need please chime in. I plan to install them myself with the help of a buddy.

What tools will I need? Any tips or advice will be greatly appreciated.


Thanks in advance.

[usaz4mcr8cr]

No help?

[inTgr8r]

Nothing special aboutvt hose parts, pick them up at your local dealer or order online.

You'll find what you need here.....
http://www.realoem.com/bmw/select.do

[beta]

You're in luck, typed this up for a friend. This is all the hardware involved.

Copper Collar Nut x 18 11 72 1 437 202
Header to the engine, 3 per pipe hence 18

Exhaust Manifold Gasket x 6 11 62 7 830 667
Gasket between header and engine

Exhaust Stud x 18 07 12 9 900 298
Studs on the engine for the headers

Exhaust Seal Ring x 2 11 62 7 830 668
Ring between headers and cats

Hex Nut (M10) x 4 18 30 1 317 898
Copper nuts between headers and cats

Exhaust Gasket x 2 18 30 7 830 674
Gasket between cats and x-pipe

Hex Nut (M8) x 6 11 62 1 744 323
Nut between cats and x-pipe

Originally Posted by usaz4mcr8cr

also, will I need to wrap the O2 sensor wires to protect the from the heat after I unfold them? If so, what kind?

I used a cloth tape, check my mod thread in my sig. If I were to do it again I'd check CRFine's thread and just make extensions. He has pictures of them in this post. You only need 10cm or so.

Originally Posted by usaz4mcr8cr

If there are any additional parts that I may need please chime in.

You will need clips to fix the O2 wiring to the heat shield. I don't have a part number but check my mod thread for pictures of them.

[mousitch]

Studs are a plus. Backed one out and fucked it up. Had to run to HF and get a die kit. Not fun

[usaz4mcr8cr]

Sweet! Thanks for the help guys!

I want to order all the parts at once.

You will need clips to fix the O2 wiring to the heat shield. I don't have a part number but check my mod thread for pictures of them.[/quote]

Where can I search for this p/n?

Also, What part #'s do I need to make the extensions?

[Gtfour]

If someone else is looking for a set of Euro headers, there is one for sale right now on m3forum.net for $650shipped

http://www.m3forum.net/m3forum/showthread.php?t=426573

[txz4]

http://www.zpost.com/forums/showthread.php?t=644550

All the help you should need right here.