Quote:
Originally Posted by Vanne
hey guys, can you list the Besian kit part numbers that you used to service the Vanos. also which bolts are required and which pump disc/anti rattle kit you used?
|
Beisan Parts:
S54 Vanos Seals Repair Kit
Item #: BS021
S54 Vanos Oil Pump Disk
Item #: BS025
S54 Vanos Rattle Repair Kit (Didn’t use, YMMV)
Item #: BS022
S54/S62 Vanos Rattle Tools (Didn’t use, YMMV)
Item #: BS095
S54 Vanos Sealing Plate Repair Kit
Item no. BS024
M62TU Vanos Pick Tools
Item #: BS096
Other Parts:
12 x cam sprocket screws PN: 07129905536
crush washers (don’t remember PN’s, sorry)
2 x for banjo built on valve cover
2 x for banjo bolt on vanos unit
if you’re replacing the timing chain guide, the 32mm tensioner has a crush washer as well
1 x Valve cover gasket (OE gasket can be reused if it’s in good shape)
1 x Vanos gasket 11367831938
Tools:
S54 Timing Bridge (can rent kit from bimmertoolrental.com for $25)
S54 Flywheel locking pin (Z4m uses a short version, e46 pin will not fit. Bimmertoolrental.com says they can provide the correct pin with the timing bridge kit, but they sent me the e46 one anyway…)
7mm, 10mm, 22mm, and 24mm open ended wrenches. Thinner is better, especially for the 24mm. (could get away with a deep socket for the 22mm)
32mm socket to turn crank (YMMV, some s54’s have a different crank bolt configuration…)
Basic hand tools (ratchets, etc.)
The vanos seals kit (item BS021) contains all the seals that are used within the vanos unit. The seals for the solenoid sealing plate are NOT included (ask me how I know…) and must be ordered separately (item BS024) if you need to replace them.
I ordered the anti-rattle kit and tools, but ended up not needing them. My splined shafts didn’t have any axial play, so I just flushed them out and refilled with fresh oil, good as new
if you weren’t halfway across the world I’d give you a deal on my unused kit