|
Hollow rod is with the althread materials at Home Depot or Lowes.
Concerning the install. I just lifted the front about 18" and set on stands. Then I came up with a stack of boxes, then used lawn bags as the compression between the box and the splitter. Did this at two points, right where the splitter and bumper stop before the first spacer. This compression allowed me to shift the splitter exactly into place and drill. Once I drilled and set the main screws on both sides from the wheel wells, I moved the boxes out and just put one in the center to keep the line straight. Going through the kidneys to install the washers and nuts. Snapped the kidney grills in and was done.
|