Quote:
Originally Posted by Starscream
Just bumping this again,
Do we need to run spacers on these or are they good to go out of the box?
|
Yu can run them just fine with out spacers but the front ZCP wheel is not the same offset as the OEM Z4M front wheel so it is a little sunken in. I think a 10mm spacer makes it look good but I went with a 15mm based on the recommendations from Rogue Engineering. I think the 15mm makes it look perfect but you couldn't run the 15mm with a stock alignment. It needs extra front camber so the wheel doesn't rub which is not a problem for me since I run -2.5ish. As far as the rear goes they look fine with out spacers but a 5mm spacer would make it look perfect. I was going to buy a 5mm spacer for the rear but I ended up picking up a set of 285 rear tires for stupid cheap to replace my worn 275s and I think the 285 will fill the arch just perfect with out the spacer