|
OP --- I ended up going with Apex ARC-8
Front 9.5x18 ET35 255/35-18 Bridgestone S04 Camber~-1.5* Fender Lip Rolled
Rear 10.0x18 ET25 275/35-18 Bridgestone S04 Camber~-2.2* Not rolled
Ride height all around is about 1" lower than stock on GC Coilovers.
With that said, THERE IS NO WAY you are gonna be able to run 10.5x18 ET20 without some serious rear camber and/or fender pulling. I am rubbing on fenders at heavy compression and even with rolled fenders you're only going to buy yourself 8-9mm MAX.
You are going to have to do one (or a combination) of the following:
Run lots of negative camber (Maybe -3.5*)
Pull fenders (not just roll)
Run stretched tires
I can prevent rubbing by running higher ride height, but that's not going to cut it at the track or if you're at full compression.
Show car --- yes. Go car --- no.
__________________
2003 Z4 2.5i
2013 FR-S
1990 911 C2
1983 Wife
|