|
I'm not 100% sure, but when I researched the parts for this there was one wiring set for the connections from console switch to seats, and another for console switch to fuse box. In the case of Z4, there is only one wire needed from console switch to fuse box IIRC(position 7 in brown connector on back of switch center). The other two wires that occupy positions 22 & 23 were already be there on my car.
One thing that might help, when you go to put the red/purple stripe wire in that pink/purplish connector in the photo above, you have to remove the connector and there is a small tab on it that must be pressed in to release the connector. The tab is hard to see, I almost missed it and nearly tried to pull it out with force. Small needlenose plyers might come in handy there. Good luck, it's pretty straightforward from here.
|