Step 9
Mounting Location
A Remove 13mm hardware and gasket ring. Once you do this the muffler will pivot up and down; the pivot points being mounting locations
B & C
Step 10
Mounting Location
C Remove 13mm bolt. Once this bolt is removed, you will want to support the weight of the muffler as will only be hanging by mounting location
B.
Step 11
Mounting Location
B Remove 13mm bolt. Read tip in second photo. Once this bolt is removed the muffler is no longer attached to the car.
Step 12
Retain all OEM hardware for installation of the RPI exhaust except for the Mounting Location
B 13mm bolt. A new shorter 13mm bolt is supplied by RPI