|
No, its not bad really, just time consuming as it took me time to identify the parts, make an extra run to the hardware store for the larger Torx (T40) bit I didn't have, figure out how some parts came out, how they re-attached, etc. If I did it again, it would be around 2 hrs.
I would suggest triple-taping the body before you pull the hoop out of the back, or, use thick towels like I did to protect the paint..... That hoop could do some real damage to the paint if you don't have it protected.
Also suggest the head-mounted work-light; many steps take both hands ..... So unless you have an assistant to hold a flash-light, you'll want that "head-light".
|