Quote:
Originally Posted by Dubbedown
I would think with slightly negative camber, it would still work on a stock suspension?
|
i don't know, dan... you're talking about moving the outside of the wheel 30mm farther than where the stock 8.0" et47 sits. that is huge. plus adding 15mm tread width... you may need more than a slight camber adjustment there.
remember that your 8.0" et34 197's with 235 tread rubbed. granted they were a bit taller, but where you're decreasing in height by 4.5mm, you're adding 10.5mm to the width.