Quote:
Originally Posted by Spaceman Spiff
I got them off without jacking the car but putting them back on would be harder. Also not sure how effective cleaning would be from below, as my vacuum cleaner wasn't strong enough to remove the debris from the passenger side drain (it's a 5hp shop vac). Hopefully the sealed-up housing will keep the new motor from rusting!
|
I've been leary of vacumming the drains from the bottom. That drain hole (as viewed on the passenger side) is way small. I'm afraid of sucking something in and then it clogging. I really don't want that drain to clog up. If there is debris on the top when it's up, I'll blow it off and clear it away from the driver's side before I put the top down. When I wash the car, I rinse from the driver's side to the passenger's side purposely. Pain in the ass.