Quote:
Originally Posted by mfanatic325
hmm...I was thinking that the splitter might actually work better with that hole/gap there. I figure the air that passes through that hole would provide more downforce rather than not? Since the air would travel along the length of the rest of the CF board, all the way to the black plastic under-tray/cover 
Also, I'm finally going to take the splitter for test runs on the track in another week. We'll see if it actually has any performance benefits =P |
In talking with a very knowledgable guy who owns his own race shop, he actually said the opposite. Filling the gap would provide MORE downforce, as you would be reducing the amount of air that could possibly leak through the underside.
crfine, very interested if you are able to make more of these pieces. Keep us posted. Always providing us with top notch work! Thanks!