Now that we have IGN 1 On
Now that we have IGN 1 On (we will remove the need of key later) with the key in it, the only thing that we did was to take the power from battery and send it to the momentary button, after the momentary button is pushed it will turn that pulse to constant. with the constant going to the ign switch where before we would have the bat. cable coming in. and you would be able to use the start normaly. but if you take ground out of the relay 2 we will no longer have constant and ign 1 would turn it off so....
I'm working on a switch relay that will cut that ground when you push the button again
Last edited by Diokaef; 07-28-2010 at 01:05 AM..
|