Hope this helps the next person who wants to do this. These are a few pictures showing what to remove and which clips hold the covers in place.
First you only really have to remove the two screws in the center, very small torx. These hold the right and left bezels in place.
This is the clip on hte bottom that holds the cover in place. DO not pry on the ones on the top, these are part of the cover, you will however need to push them(gently) under the lip to get the cover out.
Showing the front clips uder the trim bezel, lighting makes it look bad...
This is the other clip along the side of the spedo, you need to release the bottom and also push it underneath the outter trim, again be gentle.
This is what it looks like after it is free, right now the bezel will come out.
I used soft Q-Tips and a good quality glass cleaner.
Before cleaning (Yuck).
After cleaning (Yummy)
