Hello all,
I have an amazing opportunity to pull the trigger on an M Performance BBK originally designed for the new F series vehicles at a crazy price.
I am aware that these were not designed for our cars and that custom brackets will have to be made to get them to fit, however I am confident that I can get them to work.
All that aside, considering that these are not fully floating discs and not drilled (only dimpled), would anyone be able to chime in on whether this would be a significant upgrade from our stock setup.
I am interested to see what everyone's opinion is on this.
Specs are:
370x30mm and 345x24mm rotors with four piston front and two piston rear.
This is the kit in question below:
https://www.ecstuning.com/ES2587022/