Quote:
Originally Posted by 3GFX
Also... M54 vs N55....will the sim work the same?
|
Yes but for N55 you’ll only need 1. And install should be little easier because N55 is more accessible. If your m54 is anything like mine where the post cat o2 sensor connects underneath the car, you will most likely install on the DME side inside the ECU enclosure. And honestly I prefer that anyway because the sensor is protected from the heat and weather (and remains hidden). Removing the ecu took more time than installing the sensor.
Pictures are down but my brief write up:
http://www.zpost.com/forums/showthread.php?t=1394920