ZPOST - View Single Post

elerner61 · 05-14-2012, 01:51 PM

Ron, I defer to your knowledge and experience but I don't really get what you are saying (I didn't measure anything, just going off of web site info). From McMaster-Carr it seems there are only two sizes of Nord-Lock washers for M8 bolts. Below is a screen grab filtered for their M8 offering.

It seems I should get their .65" outer diameter Nord-Locks, these would be closest to the BMW size washers, and that the Zinc coated Nord-Locks should fit the bill just fine (no need to spend more for the stainless). Would you agree?

If I'm missing something, please help me out. I truly appreciate your wisdom.

05-14-2012, 01:51 PM	#25
elerner61 Major 157 Rep 1,107 Posts Drives: '07 Z4M Roadster Join Date: May 2011 Location: Mount Kisco, NY iTrader: (0)	Ron, I defer to your knowledge and experience but I don't really get what you are saying (I didn't measure anything, just going off of web site info). From McMaster-Carr it seems there are only two sizes of Nord-Lock washers for M8 bolts. Below is a screen grab filtered for their M8 offering. It seems I should get their .65" outer diameter Nord-Locks, these would be closest to the BMW size washers, and that the Zinc coated Nord-Locks should fit the bill just fine (no need to spend more for the stainless). Would you agree? If I'm missing something, please help me out. I truly appreciate your wisdom. Attached Images Last edited by elerner61; 05-14-2012 at 02:47 PM..
	Appreciate 0 Quote