EDIT: Improved formula at post #110
Got tired of so many squiggly lines, and of scanning the separate throttle position and brake pressure traces looking for coasting, so I wrote a simple math channel combining the two.
The single trace has throttle above the line, brakes below. Now easier to lay the pedal inputs alongside the speed or other channel traces, and coasting shows up as flat spots at zero.
The formula is as simple as “Z4M_PPS-Z4M_BRAKE_PR”; the Full Scale is set at 100 and the Zero Scale at -100, to range from 100% throttle to 100% (1 bar) brake pressure.
Before:
After:
