View Single Post
      02-03-2011, 10:31 AM   #3
crfine88
Colonel
crfine88's Avatar
437
Rep
2,747
Posts

Drives: E86M
Join Date: Jan 2009
Location: Cave Creek AZ.

iTrader: (19)

DIY RPI Part III

Step 13
Attach RPI muffler @ Mounting Locations B&C hand tight.
Name:  p31.jpg
Views: 19261
Size:  480.4 KB
Name:  p32.jpg
Views: 19139
Size:  276.6 KB






Step 14
Attach RPI muffler @ Mounting Location A hand tight.
Name:  p33.jpg
Views: 19032
Size:  426.1 KB
Name:  p34.jpg
Views: 19307
Size:  441.1 KB
Name:  p35.jpg
Views: 19019
Size:  407.8 KB
Name:  p36.jpg
Views: 18890
Size:  359.4 KB







Step 15
Fine adjustment for gap between muffler tips and rear bumper cover. This takes place while tightening the 13mm hardware @ mounting location A. There can be a lot of back and forth here until you get your desired gap.
Name:  p37.jpg
Views: 19075
Size:  476.6 KB
Name:  p38.jpg
Views: 19826
Size:  478.2 KB
Name:  p39.jpg
Views: 18851
Size:  366.0 KB
Name:  p40.jpg
Views: 18775
Size:  386.9 KB
Name:  p41.jpg
Views: 18911
Size:  399.8 KB
Name:  p42.jpg
Views: 18733
Size:  385.4 KB





Step 16
Tighten 13mm bolts at Mounting Locations B&C
Name:  p43.jpg
Views: 18714
Size:  317.6 KB
Name:  p44.jpg
Views: 18626
Size:  308.9 KB
Name:  p45.jpg
Views: 18979
Size:  418.4 KB







Step 17
Fine adjustment for exhaust tip protrusion
Name:  p46.jpg
Views: 18734
Size:  387.4 KB
Name:  p47.jpg
Views: 18625
Size:  416.5 KB
Name:  p48.jpg
Views: 19427
Size:  546.5 KB
Name:  p49.jpg
Views: 18527
Size:  362.0 KB









Name:  p50.jpg
Views: 18593
Size:  452.5 KB
__________________

Last edited by crfine88; 02-03-2011 at 12:03 PM..
Appreciate 6