Quote:
Originally Posted by Vanne
Byron, I meant if somehow we could modify the backing part black plastic bit on the back of the OEM intake hole.. and connect a 2.5 or 2 inch pipe to that puppy. If you pull the plastic flange, there is room enough behind there for a radiator, so a 2 to 2.5inch hose should fit, as Ian mentioned, the problem will be though the mount parts of the flange.. either that or completely do away with that bit and make something new that fits behind there..
next time i have the bumper off ill have a good look see, (that might be pretty soon as i foresee i am going to have issues fitting this OEM CSL Snork part of my intake)
kinda like these, minus the cost of course...
http://www.turnermotorsport.com/p-21...otorsport.aspx |
i hear you buddy.... i wish bmw would have done this properly from the off tbh as the vents in the lower section are in a great position to feed air into the wheel area.... sadly they left it at that...