Forgot about the EGT. Unless i'm mistaken, the euro header doesn't have a bung for the EGT. It has to be installed in front of the cats in section 1.
Anyone have any idea if it's a standard 1/4" or 1/8" .......... I may have found a source for the bung............ maybe.
Off another thread, someone posted "14x1.5 mm thread, 7.45 mm ID, 25 mm long". If that 7.45mm ID is what I think it is, looks closed to 1/4".
Last edited by tominizer; 04-23-2018 at 08:55 AM..
|