View Single Post
      09-17-2012, 01:43 PM   #84
ApexWheels
Colonel
ApexWheels's Avatar
1417
Rep
2,650
Posts

Drives: M3
Join Date: Jun 2012
Location: Bay Area

iTrader: (2)

Quote:
Originally Posted by OneManParty View Post
Only mod to clear the 18x9.5 et 35 square without any issues are camber plates? don't have to get coils?
The stock strut’s integrated lower spring perch can clear the 265 setup, so a simple camber plate install with at least -2.5 degrees of camber can make the set up work. Times where you may run into trouble is when a KW V series or any other coilover kit that utilizes a cone shaped progressive spring is used a spacer may be needed to clear to spring. You are then pushing the wheel/tire out further requiring more camber.
__________________
Appreciate 0