@Beedub @Daemonblitz @inTgr8r Thanks!
On the exhaust: My objective was to save weight. The 5Zigen Cans are Stainless and high quality. I was concerned with the look because the bumper openings would not follow the round contour of the exhaust tips, but it came out looking great IMHO.
315/30/18: Hey @ZStig, two minor things were modified because the tire would rub (slightly) against the inner fender liner (plack plastic), so I cut that, following the tire's contour and it looks stock. That inner fender liner was not even flush with the car's body.
I also pulled the outer fender lip a bit. Also looks stock.
The real difficult part was getting the offsets just right
