|
I did this on my newly purchased 06 Z4M last week. Took me less than 10 minutes total. I didn't need any glue, as the trim popped in perfectly. I found out it's important to make sure each side is an equal length running down the sides of the windshield, as it will "pull" the other side out of whack if not. Start at the upper corners of the windshield first, fitting in the trim with the corners and make sure the trim is snug in the corners. Then, do the sides and finally the middle. I had zero issues and it's been popped in place now for over a week. Very, very easy to do.
|