Quote:
Originally Posted by Vanne
I am going to re-route those puppies… actually, i am going to ditch the right one, and re-route the other. Ill be chucking an extra oil cooler on the right one.
|
Redirecting the stock vent is my thought as well. If you can add an opening inward of the stock opening( in the lower grill) as demonstrated in
THIS brake duct thread and get a duct to the rotor from there; I'm considering removing the black inset (inlet) and fabricating a collection duct to direct the air flow first toward the center of the vehicle, then pick up a flex hose as demonstrated in the noted thread above. That way the stock opening can be used.
I have not had the bumper off to assess plausibility yet. I hope to yet this summer. I have some broken plastic under the driver side nose of the car I want to replace anyway.