Quote:
Originally Posted by tikamak
Hi zstig,
ESS sent me intercooler brackets that belong to E46 M3, can you please measure the intercooler brackets your have as well as take angles so that i can fabricate it locally?
I also need the length of the intercooler pipe bracket
I also need pictures of both intercooler pipes (sc to i/c and i/c to intake) taken from below the car as well as from above so that I know how to install them.
I was sent an e46 M3 manual as well. so i don't know how this will fit exactly.
awaiting your replies in here or on jad_mrad@hotmail.com
|
ESS should give you the info you need, more accurately than me. I can help you, but not until later tonight.
If you're talking about the "intercooler pipe bracket" that attaches straight into the intercooler piping that has a hole in it, my kit didn't come with the correct one either (too short) so I fabricated one myself using a piece of aluminium