View Single Post
      02-18-2013, 05:56 PM   #4
Finnegan
Dog Listener
Finnegan's Avatar
United_States
701
Rep
7,850
Posts

Drives: Z4M/. Z3M, E36/46 M3
Join Date: Oct 2008
Location: Teaching the dog to slalom

iTrader: (22)

Quote:
Originally Posted by drbvac View Post
Thanks Very Much - both cars look great and mine being an Imola Red Coupe its nice to see them !

So from your link and comments Front - 9x18 ET 42 OR 8.5X18 ET 38 WILL fit with no mods and PSS 245 no problem ??

Rears: 9.5x18 Et 22 or 10x18 ET 25 will handle the 275's ??

Our friends at APEX have a package but the offsets are not listed : I assume they are as you suggested :

http://store.vacmotorsports.com/vac-...els-p2719.aspx

Thanks again @@@
18 x 9.5 ET 22 with 275/35s will fit, no problem, no mods. 18 x 10 should also fit, but it may require more negative camber than stock rear to tuck things in. No personal experience there.

The 18 x 8.5 ET 38 with 245/40 will fit no problem, no mods. (If you don't plan on running wider tires, the 8.5 is enough wheel for a 245/40 tire, it's the measured wheel width for that size tire.) The 18 x 9 ET42 may require a small spacer to fit. It should fit with most tires, no spacer especially those like the PSS (rounded), but it depends on the tire used. The spacer on the ET42 would push the wheel out a bit too, for a more aggressive effective offset.

The fitments for those wheels @VAC are 18 x 9 ET42 and 18 x 10 ET25. No other fitments/sizes are available from Apex for those sizes. You could buy directly from Apex too. They have all the fitments you'd want to pick from, and both EC7 and ARC8s--great folks to work with. Alternatively you could wait for someone to sell theirs--FS threads come up fairly often.
Appreciate 0