ZPOST - View Single Post - Exhaust tips too close to bumper cutouts?

3002 tii · 07-21-2010, 04:55 PM

my bastuck exhaust initially touched the bumper which obviously caused the paint to melt. i fixed the issue by throwing in some washers between the bolts and nuts to bring it down a bit. it now sits about 1/3" from the cutout which is pretty close to 7mm and I've yet to see any issues so I think you'll be fine. But to be safe, you can put in some washers too.

07-21-2010, 04:55 PM	#2
3002 tii Lieutenant General 2286 Rep 12,565 Posts Drives: Z4 M, X5, GX460 Join Date: Apr 2008 Location: CT iTrader: (99) Garage List F15 X5 xDrive35i [8.75] E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.24]	my bastuck exhaust initially touched the bumper which obviously caused the paint to melt. i fixed the issue by throwing in some washers between the bolts and nuts to bring it down a bit. it now sits about 1/3" from the cutout which is pretty close to 7mm and I've yet to see any issues so I think you'll be fine. But to be safe, you can put in some washers too. __________________ Follow for latest mods
	Appreciate 0 Quote