Quote:
Originally Posted by aerobod
I think the new thickness for the front rotors should be 28mm on the front and 20mm on the rear, with 1.6mm total wear to min thickness, from what I measured on a new set?
|
Yeah, did a little more searching and found the minimum is 26.4 front and 18.4 rear so you are bang on. My fronts are at 27.1 and rear is 19.4 so I am good for now but may need to replace at last the fronts after a track day or two this summer!
Funny though, the numbers that are stamped on the rotor hats do not match up to anything relevant to these numbers.