Quote:
Originally Posted by SaltyNC
I was measuring in poor light last night. I went back and re-measured. Original post updated with corrected values. I tried using a plumb line. It's still hard to measure accurately.
I also found out that the wheel comes in 19x10 ET 35, so I could run a 10mm spacer and have perfect fitment. Would you go 19x10 ET 25 (with spacer) or 19x9.5 ET 22 no spacer? Is a 10mm spacer an issue?
Thanks to any of our resident wheel experts.
Salty
|
Hey Salty,
I am by no means a wheel expert, here's a pic of my fitment of my rear tire setup: 19 X 9.5 et 25 on PSS 265/30/19. Not completely flush by any means but definitely safe. I'm dropped on Eibachs.