Quote:
Originally Posted by DSC_OFF
Haha, thanks... being lowered and adding camber helps. W/o dialing in the front I'd most certainly rub although I the 5mm spacer up front effectively makes it 9.5" et30 lol. I have about neg 2.8 degrees but I'm fairly certain rears would work on stock setup. The fact that Tirerack says 10" rear et40 works, that's actually a third of an inch further out than what I have so there's plenty of room back there.
|
This thread is great information!
We picked up a 2007 3.0 Si Coupe and want to get the largest R-comp we can on it.
I'm going to use my Enkei RPF1 (18x8.5 et40) square setup. Currently, I have BFG R1 in 245/40. They clear my e90 withouth any issues at all. Do you think we'll clear them on the Z4? With you running a 17x9.5 up front, I have a feeling it should work.
Do you think a 265/35 BFG R1 will clear?
Of course trimming fender liners won't be an issue since it'll be a race car.