View Single Post
      06-01-2010, 06:35 AM   #5
inTgr8r
Lieutenant General
inTgr8r's Avatar
Canada
2422
Rep
11,665
Posts

Drives: M2 Comp
Join Date: Mar 2006
Location: Toronto

iTrader: (10)

Nice writeup

FWIW
Just a couple of notes from my previous install. ('06 M Roady)

My throttle pedal was more of a soft plastic and I installed the alum pedal over top of it.
I didn't remove anything.
I liked this because it elevated the plane of the peddle making h&t easier.

On the clutch & brake;
I wedged blocks in behind the pedal AND in front.
That held it in a partially down position to drill the top holes.

Also, I clamped the alum pedals in position and used them as a drilling template.
This after trying the center punch method proved difficult due to the non-flat surface of the pedal under the rubber.
(even with a center punch the drill wants to walk away out of position)

This is is the result.
__________________
'21 M2C Hockenheim Silver
'18 718 Cayman S Lava Orange (sold)
'13 E92 M3 Santorini Blue (sold)
'07 Z4 M Coupe Alpine White (sold)
Appreciate 0