View Single Post
      05-13-2011, 02:40 PM   #57
Composite Steve
First Lieutenant
United_States
53
Rep
361
Posts

Drives: 03 330i ZHP, 73 Mini, 74 914
Join Date: Mar 2011
Location: Los Angeles, CA

iTrader: (2)

Quote:
Originally Posted by johanness View Post
Pic from the side too pls




Quote:
Originally Posted by Jumbosock View Post
You guys just look under your car. There are 2 holes at each end of the car that can be used. That leaves one needed towards the middle. There are holes towards the middle but they are probably a little offset from this lip. A small simple bracket may have to be fabbed to use the oem hole.
Quote:
Originally Posted by krnnerdboy View Post
by the looks of it I'm 99% sure that you can attach it w/o drilling any holes. On each fang you can see 2 bolts each. You'll just have to drill the splitter to match those holes
You guys are absolutely correct. There're 2 factory bolts underneath the bumper per side. Drill 4 holes on the Mstache to match the factory holes, add double sided tape and mount it. Simple to do and no permanent changes done to the car.

Shows factory holes, the 2 bolts are already removed in the picture.


Drill 2 holes per side on the Mstache to match.


Add double sided tape on the back edges.


Bolt on to install.


And you're done
Appreciate 0