View Single Post
      03-19-2018, 12:23 AM   #12
Vanne
Down Under!!
Vanne's Avatar
United Arab Emirates
1621
Rep
4,294
Posts

Drives: 2007 Z4MC
Join Date: Mar 2013
Location: Dubai

iTrader: (4)

Quote:
Originally Posted by Vanne View Post
I recon my roll bar will actually be ok, I have about 1/5th of an inch to play with. Very happy Ian was able to get it out the side door, if it would have had to go through the boot, that would have destroyed my liner.
LOL rollbar was not fine and had to be removed to get the liner out. I also looked at various options to remove the roof, and i, going from Alex's lead found that using a Guitar string (the smalls gauge one) was very easy to .. cut.. the rood off.

i have a few pics which ill post for completeness of Ian's thread.











Choose a starting point, and with a very small gauge screw driver push the guitar string through the black goup holding the roof on. I choose the backside where the boot lid goes up to start. then attach something that you can hang on to on both sides of the wire, and then you just PULL it along. but just take it easy. i used 2 guitar strings, broke 1 half way along in one of the corners. where it kinda jammed between the bottom support and the roof support where it bolts in.

Hope that made sense, it will become clear when your doing it.

Thanks to Alex and Chris for the info/method.
__________________
2007 EuroSpec Z4///MC - Building/Developing Z4 GT3
Powered by

Last edited by Vanne; 03-19-2018 at 12:30 AM..
Appreciate 0